45钢凸轮轴摩擦焊接及焊后热处理
被引量:4
Friction Welding and Post Heat Treatment for 45 Steel Camshafts
出处
《金属热处理》
CAS
CSCD
北大核心
2006年第7期90-92,共3页
Heat Treatment of Metals
参考文献6
1 赫次伯格 R W(美).工程材料的变形与断裂力学[M].王克仁,罗力更,姚蘅,等译.北京:机械工业出版社,1982:387-392.
2 美国金属学会.金属手册(第四卷)[M].北京:机械工业出版社,1986:90-137.
3 上海交通大学.金属断口分析[M].国防工业出版社,1979..
4 毛信孚,傅莉,尚高锋,赵仁存,史弼.S135钻杆的摩擦焊接、热处理对其组织与性能的影响[J] .航空材料学报,2004,24(1):57-62. 被引量:13
5 毛信孚,傅莉,尚高锋,冯红超.S135钻杆摩擦焊接头热处理后的组织和性能[J] .金属热处理,2004,29(12):22-26. 被引量:10
6 毛信孚,傅莉,赵仁存,史弼.摩擦焊接钻杆组织、性能及其韧性损伤[J] .航空制造技术,2004,47(11):78-81. 被引量:3
二级参考文献7
1 R.W.赫次伯格 王克仁等(译).工程材料的变形与断裂力学[M].机械工业出版社,1982..
2 刘智儒.金属感应加热[M].北京:机械工业出版社,1985.9.414—417.
3 TUMULURE M D. A Parametric Study of Inertia Friction Welding for Low Alloy Steel Popes[J]. W J,1984,63(9) :289 - 294.
4 EBERHARB B J. Friction weld ductility and toughnessas influenced by inclusion morphology [ J ]. Welding Research Supplement , 1983 : 171 - 178.
5 Eberharb B J.Friction Weld Ductility and Toughness as Influenced by Inclusion Morphology[J].Welding Research Supplement,1983 :171-178.
6 Healy J T,et al.Analysis of Frictional Phenomena in Friction Welding of Mild Steel [J].Wear,1976 :265-278.
7 段立宇 高大路 雷永平 等.G105高强度钻杆摩擦焊接头强韧性能控制[J].西北工业大学学报,1993,11:88-93.
共引文献32
1 毛信孚,石僖民,焦健民,马富强.Cr12MoV钢制柱塞裂纹萌生断裂破损的原因分析[J] .航空精密制造技术,2012,48(2):42-45. 被引量:2
2 俞松,于永.G102高温过热器管焊接接头开裂原因分析[J] .热力发电,2005,34(2):54-56.
3 毛信孚,傅莉.地质钻杆摩擦焊接组织和力学性能[J] .理化检验(物理分册),2005,41(5):230-232. 被引量:1
4 刘玲霞,成建国,吕绯.7A52铝合金焊接结构件疲劳性能研究[J] .兵器材料科学与工程,2005,28(5):37-40. 被引量:12
5 徐跃,康永林,王朝辉.AZ91D镁合金半固态浆料近液相线法制备工艺[J] .有色金属,2005,57(4):1-5. 被引量:9
6 舒信福,张晓龙,常殿存,舒蕊,朱延东,李铃芳.准铸态贝氏体低碳球铁的组织分析[J] .金属热处理,2005,30(10):88-91. 被引量:3
7 黄明初,尹志民,王涛.超高强铝合金紧凑拉伸法断裂韧性测试方法探讨[J] .轻合金加工技术,2005,33(11):41-45. 被引量:1
8 毛信孚,刘小文,王玉,冯红超.碳素结构钢与高速工具钢摩擦焊与闪光焊接头的组织和性能[J] .材料工程,2006,34(12):28-31. 被引量:4
9 范宋杰,何国球,刘晓山,徐坡.A356铝合金显微结构及拉伸断口分析[J] .金属功能材料,2007,14(2):24-27. 被引量:15
10 毛信孚,傅莉,刘申城,常学斌.地质钻杆的摩擦焊接和热处理[J] .航空制造技术,2007,50(5):93-95. 被引量:2
同被引文献6
1 黄春峰.现代航空发动机整体叶盘及其制造技术[J] .航空制造技术,2006,49(4):94-100. 被引量:78
2 王敬和,曲伸,祝文卉.现代摩擦焊技术在航空制造业中的应用和发展[J] .航空制造技术,2006,49(5). 被引量:12
3 Tseng C F,Savage W F.The effect to farcoscillation in either the transverse or longitudinal direction has a beneficial effect on the fusion zone microstructure and tends to reduce sensitivity to hot cracking[J].Welding Journal,1971,50(12):777-785.
4 傅莉,杜随更.摩擦焊接过程数值模拟技术研究进展[J] .焊接学报,2001,22(5):87-92. 被引量:21
5 李付国,聂蕾,李庆华,段立宇.GH4169合金惯性摩擦焊接过程组织计算与预测[J] .焊接学报,2002,23(1):30-33. 被引量:19
6 栾国红,关桥.搅拌摩擦焊——革命性的宇航制造新技术[J] .航天制造技术,2003(4):16-23. 被引量:44
引证文献4
1 杨明鄂,刘龙飞,蔡志鹏.液压缸连续驱动摩擦焊接的温度场模拟与试验分析[J] .热加工工艺,2012,41(1):121-123. 被引量:2
2 杨明鄂,刘龙飞,曾朝晖,马国庆.活塞杆连续驱动摩擦焊接工艺参数的设计[J] .热加工工艺,2012,41(3):129-130. 被引量:7
3 王建春,杨明鄂,康小建.45钢连续驱动摩擦焊的温度场数值模拟及实验验证[J] .机械工程师,2012(2):57-59.
4 杨明鄂.活塞杆连续驱动摩擦焊接的温度场模拟[J] .民营科技,2014(8):64-64.
二级引证文献8
1 刘龙飞,杨明鄂.活塞杆摩擦焊接头热处理工艺研究[J] .热加工工艺,2013,42(3):147-150. 被引量:1
2 刘龙飞,杨明鄂.活塞杆连续驱动摩擦焊接头性能分析与对策[J] .热加工工艺,2013,42(19):36-39. 被引量:4
3 王佳,朱海,路达.摩擦焊过程热力耦合数值模拟研究历程及现状[J] .焊接,2015(4):15-20.
4 宋雨来,谢良稳,王雪竹,刘耀辉,孔祥瑞,杨鹏聪,侯振华.顶锻压力对1045钢/5Cr5MoV模具钢摩擦焊组织与性能的影响[J] .吉林大学学报(工学版),2019,49(2):521-528. 被引量:1
5 阚成玲,张骁勇,史文海,徐学利.工艺参数对X100摩擦焊接头性能影响的显著性研究[J] .电焊机,2019,49(12):70-76. 被引量:2
6 房舟,黄崇莉,徐永帅,张昌明.基于PID算法摩擦焊机移动速度闭环控制系统研究[J] .机床与液压,2020,48(4):29-32. 被引量:7
7 韦金钰,曹星星,李斯,刘洋,李亚生.基于连续驱动摩擦焊的活塞杆焊接工艺与力学性能研究[J] .液压气动与密封,2020,40(8):74-78. 被引量:1
8 王文安,刘志奇,谢志鸣.激光加工表面织构对配流盘重载摩擦副摩擦磨损特性的影响[J] .热加工工艺,2022,51(22):97-101. 被引量:4
1 康东青,李建立,贺凯.17-4PH焊接及焊后热处理工艺研究[J] .科技风,2014(23):18-18.
2 丁韦,宋宏图,刘艳红,黄辰奎.热循环对贝氏体钢轨组织及韧性的影响[J] .焊接技术,2007,36(6):21-23.
3 张继诚,符仁钰,张梅,陈洁,李麟.焊接及焊后热处理对双相钢组织和性能的影响[J] .热处理,2005,20(4):17-20. 被引量:2
4 郭韡,王快社,王峰,王文,王文礼.热处理对AZ31B镁合金搅拌摩擦焊焊接接头显微组织和显微硬度的影响[J] .机械工程材料,2009,33(10):33-36. 被引量:5
5 林华.关于灰口铸铁现场焊接的研究[J] .装备制造技术,2008(12):170-172.
6 欧阳杰,冯砚厅,王庆.P91钢焊接及焊后热处理中的问题分析[J] .河北电力技术,2008,27(3):13-14. 被引量:11
7 张元秀.简述气压焊接及焊后热处理[J] .科技信息,2012(35):134-134.
8 罗日萍,黄泽,张志光.压力容器用复合钢板的使用及技术分析[J] .石化技术,2015,22(3).
9 涂光祺(编译).焊接模具钢的正确方法[J] .锻造与冲压,2007(12):53-54.
10 张效宁,景益,余燕,吴毅雄,左波,张俊宝,姚俊俊.SA738Gr.B钢奥氏体化高温停留时间及峰值温度对组织演变及性能影响的研究[J] .热加工工艺,2013,42(7):22-25. 被引量:8
;