摘要
目的建立复方硫酸亚铁缓释片中硫酸亚铁和叶酸的含量测定方法。方法硫酸亚铁采用比色法,叶酸采用HPLC法。结果硫酸亚铁和叶酸的线性范围分别为2.625—15.750mg·L^-1和1.45—23.20mg·L^-1,平均回收率分别为99、27%和99.28%,RSD分别为0.83%和1.28%。结论方法可靠,简单可行,可用于复方硫酸亚铁缓释片的质量控制。
Aim To establish the determination method of ferrous sulfate and folic acid in compound ferrous sulfate sustained-release tablets. Methods A colorimetric method was used for determining ferrous sulfate and HPLC for folic acid. Results The ferrous sulfate and folic acid calibration curves were linear at the ranges of 2. 625 - 15.75 mg· L^ -1 and 1.45- 23.20 mg·L^-1 respectively. The average recoveries and RSD were 99.27% ,0, 83 % for ferrous sulfate and 99, 28% , 1,28% for folic acid, Conclusion This method is reliable and simple which could be used for the quality control of compound ferrous sulfate sustained -release tablets.
出处
《安徽医药》
CAS
2006年第8期579-580,共2页
Anhui Medical and Pharmaceutical Journal
关键词
复方硫酸亚铁缓释片
硫酸亚铁
叶酸
比色法
HPLC法
compound ferrous sulfate sustained-release tablets
ferrous sulfate
folic acid
colorimetric method
HPLC