摘要
The paper reports that Hfrio dielectric is deposited by reactive co-sputtering of Hf and Ti targets in an Ar/O2 ambience, followed by an annealing in different gas ambiences of N2, NO and NH3 at 600℃ for 2 min. Capacitancevoltage and gate-leakage properties are characterized and compared. The results indicate that the NO-annealed sample exhibits the lowest interface-state and dielectric-charge densities and best device reliability. This is attributed to the fact that nitridation can create strong Si≡N bonds to passivate dangling Si bonds and replace strained Si-O bonds, thus the sample forms a hardened dielectric/Si interface with high reliability.
The paper reports that Hfrio dielectric is deposited by reactive co-sputtering of Hf and Ti targets in an Ar/O2 ambience, followed by an annealing in different gas ambiences of N2, NO and NH3 at 600℃ for 2 min. Capacitancevoltage and gate-leakage properties are characterized and compared. The results indicate that the NO-annealed sample exhibits the lowest interface-state and dielectric-charge densities and best device reliability. This is attributed to the fact that nitridation can create strong Si≡N bonds to passivate dangling Si bonds and replace strained Si-O bonds, thus the sample forms a hardened dielectric/Si interface with high reliability.
基金
Project supported by the National Natural Science Foundation of China （Grant No 60376019）.
