摘要
通过提出几种不同的挤压铸造工艺方案,研究了挤压铸造技术成形压缩机活塞的可行性。结果表明,采用直接式挤压铸造以1模4型腔,对保证制件质量,提高生产效率是有利的;采用间接式挤压铸造以液流从制件两端厚壁处进入型腔,模具以侧抽芯拉杆式卸料机构更为合理。
The availability of compressor piston in squeezing casting has been researched by comparing different squeezing casting ways. The results show that the direct squeezing casting is favorable for ensuring casting quality and improving production efficiency, while in indirect squeezing casting,liquid alloy should be flowed into the cavity from thick-wall at two-end of the work piece, where the side-drawing-core discharging mechanism is adopted in the mould.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
2006年第8期498-500,共3页
Special Casting & Nonferrous Alloys
关键词
挤压铸造
压缩机活塞
模具
Squeezing Casting, Compressor Piston, Mould
