摘要
应用田口法对切削速度、背吃刀量以及每齿进给量三个主要影响表面粗糙度的因素进行分析,求出各个因素不同水平的平均表面粗糙度和信噪比(S/N),得到最优切削参数。预测经最优切削参数加工得到的表面粗糙度值,最后通过确认实验验证了其正确性。
Applies Taguchi method for optimizing the turning operations about the depth of cut, cutting speed and feed rate after obtaining every factor with different level' s mean surface roughness and S/N. Then, predicting the optimum performance and vali- dating the optimum cutting conditions by using a confirmation experiment.
出处
《现代制造工程》
CSCD
2006年第8期78-80,共3页
Modern Manufacturing Engineering
关键词
高速切削
表面粗糙度
田口法
最优切削参数
High-Speed Machining(HSM) Surface roughness Taguchi method Optimal cutting parameters