螺旋输送机的选型设计

Choose and Scheme the Type for Spiral Conveyor

介绍了螺旋输送机的选型设计过程,其中包括设计计算、螺旋输送机及配套驱动装置的选用和螺旋输送机的安装与调整3大部分。根据用户提供的原始资料和设计要求进行准确无误的设计计算(主要包括螺旋直径及螺旋轴转速的计算和功率计算),求出所需的选型数据,然后以此选型数据为依据,以厂方提供的螺旋输送机选型设计手册为主,以其他相关工具书和资料为辅,选出符合要求的螺旋输送机的外形及安装尺寸、长度组合数据和主要组成部件的相关尺寸,以及相配套驱动装置的安装尺寸及其相关数据,最终完成该螺旋输送机的选型设计。

The papers introduce the procedure about one spiral conveyor, which concludes designation, calculation, and its drawing device erection and adduction, the designation, and the calculation is focal among these that motioned above. According to the initial means and design requirement from the factory calculate accurately and then work out the requested data. In view of the data, what＇s more, taking account of the design manual about spiral conveyor from the factory and else reference-book, material, select the suitable geometrical dimension, working apartment and it＇s dimension, drawing device and it＇s measurement and working data for the GX400 spiral conveyor, at last finish the design procedure about it. The paper also introduce the installation and adduction about spiral conveyor.