摘要
在光学耦接器设计中引人衍射面,根据衍射光学元件的三级像差理论,通过理论计算和ZEMAX光学软件优化,给出工作波长0.4~0.7μm,焦距27mm,光学长度为62.9mm,采用一个衍射面的耦接器设计实例。该耦接器采用物方远心光路结构,适用于单丝直径16μm,截面直径为6mm的光纤传像束。对设计结果的分析表明,折-衍混合耦接器不仅在光学性能方面优于传统的光学耦接器,而且在尺寸和质量上有显著的减少。实际的室内外成像实验证明,光学设计软件的仿真结果是正确的。
According to the third order aberration theory of binary optical element, the optical coupler system with one diffractive surface, telecentric optical path structure in the object space is shown with calculation and optimization of optical design software ZEMAX, whose operating wavelength is 0.4 - 0.7μm, focal length is 27 mm, and optical length is 62.9 mm. The result is available for the image fiber bundle, whose single core diameter is 16μm and section diameter is 6 ram. Compared with the conventional optical coupler, the hybrid refractive-diffractive system offers considerable reduction in the apparent size, weight, and improves the image quality. The simulation results of optical design software are proved well by the experiments on scenic imaging both indoors and outdoors.
出处
《中国激光》
EI
CAS
CSCD
北大核心
2006年第9期1210-1213,共4页
Chinese Journal of Lasers
关键词
应用光学
折-衍混合耦接器
二元光学
光纤传像束
远心光路
applied optics
hybrid refractive-diffractive coupler
binary optics
image fiber bundle
telecentric optical path