期刊文献+

AZ91D-RE-xCa镁合金挤压管件组织及性能 被引量:1

Microstructure and Mechanical Properties of AZ91D-RE-xCa Mg Alloy Extruded Tube
下载PDF
导出
摘要 研究了镁合金AZ91D加入混合RE及Ca进行合金化后的AZ91D-RE-xCa(x=0.5、1.0、1.5)镁合金挤压管件的显微组织、室温及高温(150℃和200℃)力学性能。结果表明,合金化之后的镁合金挤压管件高温性能得到了显著的提高。在200℃时,钙含量(质量分数)为0.5%时,σb为225.2MPa,σ0.2为179.3MPa,δ为5.3%,好于同等试验条件下的镁合金AZ91D管件。 Microstructure, mechanical properties of AZ91D-RE-xCa Mg alloy extruded tube at ambient and high temperatures were investigated. It was revealed that the mechanical properties of the alloyed Mg alloy extruded tube at a high temperature can be significantly improved. The optimized mechanical properties of the Mg alloy extruded tube with 0.5% Ca content, including tensile strength of 225.2 MPa, yield strength of 179.3 MPa and elongation of 5.3%, at a high temperature of 200 ℃ can be obtained , which is superior to those of AZ91D Mg alloy extruded tube at the same experimental conditions.
机构地区 沈阳工业大学
出处 《特种铸造及有色合金》 CAS CSCD 北大核心 2006年第9期565-567,共3页 Special Casting & Nonferrous Alloys
关键词 镁合金 混合RE CA 高温性能 Mg Alloy, Mistchmetal, Ca, Properties at High Temperature
  • 相关文献

参考文献6

二级参考文献51

  • 1张诗昌,魏伯康,林汉同,王立士.钇及铈镧混合稀土对AZ91镁合金铸态组织的影响[J].中国有色金属学报,2001,11(z2):99-102. 被引量:82
  • 2罗治平,张少卿,汤亚力,宋德玉.稀土在镁合金溶液中作用的热力学分析[J].中国稀土学报,1995,13(2):119-122. 被引量:37
  • 3郑来苏.铸造合金及其熔炼[M].西安:西安工业大学出版社,1994..
  • 4徐光宪.稀土[M].北京:冶金工业出版社,1997..
  • 5Cahn R W 丁道云(译).非铁合金的结构与性能[M].北京:科学出版社,1999..
  • 6中山大学金属系.稀土物理化学常数[M].北京:冶金工业出版社,1987..
  • 7陆树荪 等.有色合金及其熔炼[M].北京:国防工业出版社,1983..
  • 8Chang Siyoung,Mater Trans JIM,1997年,38卷,6期,526页
  • 9Zhai Chunquan,特种铸造及有色合金,1997年,4期,48页
  • 10梁英教,无机物热力学数据手册,1993年

共引文献218

同被引文献16

  • 1曹林锋,杜文博,苏学宽,聂祚仁,左铁镛.Ca合金化在镁合金中的作用[J].铸造技术,2006,27(2):182-184. 被引量:26
  • 2宋雨来,刘耀辉,朱先勇,王素环,于思荣.钕对AZ91镁合金组织及机械性能的影响[J].吉林大学学报(工学版),2006,36(3):289-293. 被引量:25
  • 3XU S W, MATSUMOTO N, YAMAMOTO K, et al. High tem- perature tensile properties of as-cast Mg-Al-Ca alloys[J]. Materials Science and Engineering, 2009, A509: 105-110.
  • 4HOMMA T, KUNITO N, KAMADO S. Fabrication of extraordi- nary high-strength magnesium alloy by hot extrusion[J]. Scripta Mater., 2009, 61: 644-647.
  • 5KONDORI B, MAHMUDI R. Effect of Ca additions on the micro- structure, thermal stability and mechanical properties of a east AM60 magnesium alloy [J]. Materials Science and Engineering, 2010, 527:2 014-2 021.
  • 6SHANG L, JUNG I H, YUE S, et al. An investigation of forma- tion of second phases in microalloyed,AZ31 Mg alloys with Ca, Sr and Ce [J]. Journal of Alloys and Compounds, 2010, 492: 173- 183.
  • 7SUMIDA M. Microstrueture development of sand-cast AZ-type magnesium alloys modified by simultaneous addition of calcium and neodymium[J]. Journal of Alloys and Compounds, 2008, 460:619-626.
  • 8WANG J L, YANG J, WU Y M, et al. Microstructures and me- chanical properties of as-cast Mg-5Al-0. 4Mn-xNd (x= 0, 1, 2 and 4) alloys [ J ]. Materials Science and Engineering, 2008, A472: 332-337.
  • 9张远超.镁钙合金组织及性能的研究[D].哈尔滨:哈尔滨理工大学,2010.
  • 10SON H T, LEE J S, OH I H, 等. Microstructure and mechanical properties of Mg-Al-Ca-Nd alloys fabricated by gravity casting [J]. J. Mater. Sci. Technol., 2008,24(1):85-89.

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部