期刊文献+

Fluid Flow Modeling of Arc Plasma and Bath Circulation in DC Electric Arc Furnace 被引量:5

Fluid Flow Modeling of Arc Plasma and Bath Circulation in DC Electric Arc Furnace
下载PDF
导出
摘要 A mathematical model describing the flow field, heat transfer and the electromagnetic phenomenon in a DC electric arc furnace has been developed. First the governing equations in the arc plasma region are solved and the calculated results of heat transfer, current density and shear stresses on the anode surface are used as boundary conditions in a model of molten bath. Then a two-dimensional time-dependent model is used to describe the flow field and electromagnetic phenomenon in the molten bath. Moreover, the effect of bottom electrode diameter on the circulation of molten bath is studied. A mathematical model describing the flow field, heat transfer and the electromagnetic phenomenon in a DC electric arc furnace has been developed. First the governing equations in the arc plasma region are solved and the calculated results of heat transfer, current density and shear stresses on the anode surface are used as boundary conditions in a model of molten bath. Then a two-dimensional time-dependent model is used to describe the flow field and electromagnetic phenomenon in the molten bath. Moreover, the effect of bottom electrode diameter on the circulation of molten bath is studied.
机构地区 School of Electronic
出处 《Journal of Iron and Steel Research(International)》 SCIE EI CAS CSCD 2006年第5期7-13,共7页 钢铁研究学报(英文版)
关键词 DC electric arc furnace fluid flow heat transfer molten bath DC electric arc furnace fluid flow heat transfer molten bath
  • 相关文献

参考文献2

  • 1M. Capitelli,G. Colonna,C. Gorse,A. D’Angola.Transport properties of high temperature air in local thermodynamic equilibrium[J].The European Physical Journal D.2000(2)
  • 2F. Qian,B. Farouk,R. Mutharasan.Modeling of fluid flow and heat transfer in the plasma region of the dc electric arc furnace[J].Metallurgical and Materials Transactions B.1995(5)

同被引文献32

  • 1王小兰.“十四五”以来中国钢铁的绿色之路[J].环境工程,2023,41(S02):1196-1199. 被引量:1
  • 2成国光,覃祖柱,范涛.电弧炉炉底吹气搅拌冷模拟研究[J].炼钢,1994,10(3):17-20. 被引量:7
  • 3李青.直流电弧炉电弧加热废钢熔化过程数学模型及其数值模拟[J].工业加热,2005,34(4):5-11. 被引量:3
  • 4董志刚,康仁科,金洙吉,王宁会.单晶MgO基片超精密加工技术研究[J].人工晶体学报,2006,35(6):1372-1377. 被引量:2
  • 5CHOO R T C, SZEKELY J, WESTHOFF R C. On the calculation of the flee surface temperature of gas-tungsten-arc weld pools from first principles: Part I. Modeling the welding arc[J]. Metallurgical Transactions B, 1992, 23B(6): 357-369.
  • 6QIAN F, FAROUK B, MUTHARASAN R. Modeling of fluid flow and heat transfer in the plasma region of the dc electric arc furnace[J]. Metallurgical and Materials Transactions B, 1995, 26: 1057-1067.
  • 7JARDY A, FALK L, ABLITZER D. The energy exchange during vacuum arc remelting[J]. Ironmaking and Steelmaking, 1992, 19(3): 226-232.
  • 8ANDREEV A L, ANOSHKIN N F, BOCHVAR G A. Plavkai litye titanovykh splavov (Melting and casting of titanium alloys)[C]//ALEKSANDROV V K, et al, ed. Moscow: Metallurgiya, 1994.
  • 9Westhoff R, Szekely J. A model of fluid, heat flow and electromagnetic phenomena in a non transferred arc plasma torch [ J ]. Journal of Applied Physics, 1991,70 (7) : 3455 -3466.
  • 10Banchire J M, Gonzalez J J, Gleizes A. Modeling of DC plasma toureh in alminar and turbulent flow [ J ].Plasma Chemistry and Plasma Processing, 1997, 17(4) : 409 -432.

引证文献5

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部