期刊文献+

Influence of coupling agent′s self-assembly upon performance of polymer coated FBG pressure sensors

Influence of coupling agent′s self-assembly upon performance of polymer coated FBG pressure sensors
下载PDF
导出
摘要 Based on super-molecule self-assembly and entropy-driven self-assembly mechanisms,the coupling agent was evolved into colloid spheres with average diameter of 2-2.3 μm on the fiber Bragg grating (FBG) with silicon substrate,and the coupling mechanism among polymer,coupling agent and FBG was analyzed.The polymer coated FBG pressure sensors was capsulated by uniform coupling mode and self-assembly coupling mode of the coupling agent respectively,and their performance parameters were tested.It was shown,adopting the self-assembly coating of coupling agent and with the same other capsulated technologies,that the measuring range of the sensor expanded from 0.6 MPa to 1.6 MPa,the repeated times for coupling failure increased from 54 to 125 times and the pressure sensitivity coefficient enhanced from 1.09 to 2.98.By controlling the diameter of the spheres and the line density,the measuring range and the sensitivity of the FBG pressure sensors can be obviously improved. Based on super-molecule self-assembly and entropy-driven self-assembly mechanisms,the coupling agent was evolved into colloid spheres with average diameter of 2-2.3 μm on the fiber Bragg grating (FBG) with silicon substrate, and the coupling mechanism among polymer, coupling agent and FBG was analyzed. The polymer coated FBG pressure sensors was capsulated by uniform coupling mode and self-assembly coupling mode of the coupling agent respectively, and their performance parameters were tested. It was shown, adopting the self-assembly coating of coupling agent and with the same other capsulated technologies,that the measuring range of the sensor expanded from 0.6 MPa to 1.6 MPa,the repeated times for coupling failure increased from 54 to 125 times and the pressure sensitivity coefficient enhanced from 1.09 to 2.98. By controlling the diameter of the spheres and the line density,the measuring range and the sensitivity of the FBG pressure sensors can be obviously improved.
出处 《Optoelectronics Letters》 EI 2006年第5期329-333,共5页 光电子快报(英文版)
基金 This work was supported by the National "863" Project of China(No.2002AA313150) .
  • 相关文献

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部