期刊文献+

过量PbO、MgO对PMN-PT陶瓷介电性能的影响 被引量:1

The effect of excess PbO and MgO on dielectric property of PMN-PT
下载PDF
导出
摘要 为减少焦绿石相,采用二次合成法制备0.67PMN-0.33PT陶瓷,研究过量PbO、MgO对0.67PMN-0.33PT陶瓷结构和介电性能的影响.结果表明,过量PbO和MgO都能减少介电损耗,但是过量PbO同时降低了介电常数.过量PbO和过量MgO对样品的相变温度Tm没有影响. To reduce the pyrochlore phase, 0.67PMN- 0.33PT was prepared by the columbite method and excess PbO and MgO were added. The samples were studied about the microstmcture, the microwave dielectric constant. It was found that both excess PbO and MgO could reduce dielectric loss. But the samples with excess PbO had low dielectric constant simultaneity, whether excess PbO or MgO doesn' t influence the transition temperature Tm .
作者 刘霞 曹万强
出处 《湖北大学学报(自然科学版)》 CAS 北大核心 2006年第3期263-265,共3页 Journal of Hubei University:Natural Science
基金 湖北大学重点研究和湖北省创新群体项目资助
关键词 PMN-PT陶瓷 介电性能 微观结构 弥散相变 PMN - PT ceramics dielectric microstructure, diffuse phase transition
  • 相关文献

参考文献5

二级参考文献32

  • 1[1]Swartz S L, Shrout T R, Schulze W A, et al. J. Am. Ceram. Soc., 1984, 67: 311-315.
  • 2[2]Lejeune M, Boilot J P. J. Am. Ceram. Soc., 1985, 20: 493-499.
  • 3[3]Dong Heon Kang, Ki Hyun Yoon. Ferroelectrics, 1988, 87: 255-264.
  • 4[4]Lejeune M, Boilot J P. Am. Ceram. Soc. Bull., 1986, 64 (4): 679-682.
  • 5[5]Koichiro Tsuzuku, Masayuki Fujimoto. J. Am. Ceram. Soc., 1994, 77 (6): 1451-1456.
  • 6[6]Fr é d é ric Chaput, Jean-Pierre Boilot, et al. J. Am. Ceram. Soc., 1989, 72 (8): 1335-1357.
  • 7[7]Tomoaki Futakuchi, et al. Jpn. J. Appl. Phys., 1996, 35: 5113-5116.
  • 8[8]Swartz S L, Shrout T R. Mat. Res. Bull., 1982, 17: 1245-1250.
  • 9[9]Shrout T R, Halliyal A. Am. Ceram. Soc. Bull., 1987, 66: 704-711.
  • 10[10]Smolenskii G M. Proc. 2nd Int. Meet. Ferroelectr. (IMF-2), 1969(1970); 26-35.

共引文献10

同被引文献23

  • 1陈慧英,李怡敏,杨泽玮,李转秀,熊常健,李辉.稀土钇掺杂纳米钛酸钡基介电陶瓷的合成及其性能研究[J].稀土,2005,26(3):27-29. 被引量:12
  • 2邓金侠,邢献然,于然波,陈骏,邢奇凤,罗君,刘桂荣.先驱体合成法制备PMN-PT弛豫铁电体及其表征[J].金属学报,2005,41(5):503-506. 被引量:3
  • 3彭家根,王峰平,游小凤.高压电容器用铁电陶瓷[J].电子元件与材料,2006,25(12):16-19. 被引量:3
  • 4CROSS L E. Relaxor ferroelectrics[J]. Ferroelectrics, 1987, 76(1): 241- 267.
  • 5CHEN Y H, VIEHLAND D, TAKAHASHI S, et al. Mn-modified Pb ( Mg1/3 Nb2/3 ) O3-PbTiOa ceramics : improved mechanical quality factors for high-power transducer applications[J]. Japanese Journal of Applied Physics, 2000, 39(8) : 4 843-4 852.
  • 6NIEMIEC P, SKULSKT R, BOCHENEK D. Technology and properties PMN-PT-PS-PFN: Li material for multilayer capacitor[J]. Archives of Metallurgy and Materials, 2013, 58 (4): 1 313 - 1 316.
  • 7SWARTZ S L, SHROUT T R. Fabrication of perovskite lead magnesium niobate[J]. Mater Res Bull, 1982, 17(10) : 1 245 - 1 250.
  • 8CHEN J, FAN H Q, CHEN X L, et al. Fabrication of pyrochlore-free PMN-PT thick films by electropboretic deposition[J]. Journal of Alloys and Compounds, 2009, 471(1/2) : 51 -53.
  • 9PENG B L, FAN H Q, ZHANG Q. The Contribution of the " Extrinsic " polarizations to the dielectric tunability of Pb(Mg1/3 Nb2/3 ) (1 - x) TixO3 relaxor ferroelectrics [J]. J Am CeramSoc, 2012, 95(5): 1 651-1 655.
  • 10王嫡懿.陶瓷储能电容器材料的研究[D].成都:电子科技大学,2011.

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部