期刊文献+

密度对刨花板热压过程中表层与芯层压力的影响 被引量:1

Effect of density on the surface and central layers pressure of particleboard during hot-pressing
下载PDF
导出
摘要 研究了密度对刨花板热压过程中表层与芯层压力的影响,并对不同密度刨花板热压过程中芯层压力与芯层温度的关系进行了探讨。结果表明,随着密度增大,热压过程中刨花板板坯表层与芯层的压力最高值增大;板坯芯层汽化段的温度高低与此阶段板坯芯层的压力大小有关,板坯密度越大,芯层压力越大,汽化段温度也越高。 The paper presents the research of density's effect on the pressure of surface and central layers,and discusses the relationship of central layer's pressure and temperature. Results indicate that the pressure maximum values of both the surface and central layers increase with the increasing density of particleboard mat ;the central layers temperature of evaporation stage is closely related to its pressure,and the temperature and the pressure of central layer is in direct proportion to the particleboard mat density.
出处 《西北农林科技大学学报(自然科学版)》 CSCD 北大核心 2006年第9期130-134,共5页 Journal of Northwest A&F University(Natural Science Edition)
基金 西北农林科技大学重点科研项目
关键词 刨花板 表层压力 芯层握力 压板工艺 particleboard surface layer pressure central layer pressure hot-pressing technology
  • 相关文献

参考文献8

  • 1陆仁书.刨花板制造学[M].2版.北京:中国林业出版社,1992.
  • 2Kamke F A,Casey L J.Fundamentals of flakeboard manufacture:internal-mat conditions[J].Forest Products Journal,1988,38(6):38-44.
  • 3Smith D C.Waferboard press closing strategies[J].Forest Products Jonrnal,1982,32(3):40-45.
  • 4Balszs G Zombori,Frederick A Kamke,Layne T Watson.Simulation of the internal condition during the hot-pressing process[J].Wood and Fiber Science,2003,35 (1):2-23.
  • 5Kamke F A,Casey L J.Gas pressure and temperature in the mat during flakeboard manufacture[J].Forest Products Journal,1988,38(3):41-43.
  • 6Pablo Jose Garcia.Three-dimensional heat and mass transfer during oriented strandboard hot-pressing[D].Vanconver (Canada):the University of British Colombia,2002.
  • 7Bolton A J,Humphrey P E.The hot pressing of dry-formed wood-based composites Part Ⅱ Predicted vapour pressure and temperature variation with time,compared with experimental data for laboratory boards[J].Holzforshung,1998,43(4):265-274.
  • 8徐长妍,华毓坤.喷蒸真空热压刨花板板坯内部的温度场特性[J].林产工业,2002,29(6):13-15. 被引量:11

二级参考文献2

  • 1[1]Frederick A. Kamke & Linda J. Casey. Fundamentals of flakeboard manufacture: internal-mat conditions. Forest Products Journal, Vol. 38.No. 6: 38-44.
  • 2[2]T. Hata. Heat flow in particle mat and properties of particleboard under steam pressing. Wood Research. 1994.80:1-47.

共引文献10

同被引文献11

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部