期刊文献+

吖啶红动力学荧光法测定痕量甲醛 被引量:9

Kinetic spectrofluorimetric determination of formaldehyde with acridine red
下载PDF
导出
摘要 在H2SO4介质中,以KCIO3-吖啶红为指示反应,建立了测定甲醛的动力学荧光分析法。方法的线性范围为40~600μg/L,检出限为27μg/L。方法用于树脂整理特殊织物和动物标本室内空气中甲醛的测定,与标准方法乙酰丙酮分光光度法进行对照,所测结果经t-检验无显著性差异。 A new kinetic spectrofluorimetric method for the determination of formaldehyde was proposed. The method was based on the catalytic effect of trace formaldehyde on the oxidation of acridine red by potassium chlorate in sulfuric acid medium. The optimum experimental conditions for the determination were studied. The linear range of the deterruination is 40 - 600 μg/L, and the detection limit is 27 μg/L. The method was applied to determine free formaldehyde in fabric and in the air of an animal specimen room. A comparison was done between the proposed method and the acetyl acetone spectrophotometric method. The results obtained from the two methods show no significance difference by t-tests.
出处 《分析试验室》 CAS CSCD 北大核心 2006年第9期10-13,共4页 Chinese Journal of Analysis Laboratory
基金 国家自然科学基金(40203011) 河南省自然科学基金(0511021200)资助项目
关键词 甲醛 吖啶红 动力学荧光法 织物 空气 Formaldehyde Acridine red Kinetic spectrofluorimetric method Fabric Air
  • 相关文献

参考文献9

二级参考文献40

  • 1辛淑梅,罗萍.气相色谱法测定水中甲醛[J].环境保护科学,1995,21(3):37-38. 被引量:4
  • 2余倩,彭兰乔,刘怀宇,黄泽镜.甲醛被动式检气管的研制[J].分析试验室,1996,15(4):91-94. 被引量:7
  • 3田崇彬,张检,王玲玲,徐晓力.对品红亚硫酸光度法测定废水中的甲醛[J].中国环境监测,1996,12(3):29-30. 被引量:5
  • 4环境监测分析方法编写组.环境监测分析方法[M].北京:中国环境科学出版社,1986..
  • 5袭著革.室内空气中微量甲醛污染与监测进展[J].重庆环境科学,1987,9(4):210-212.
  • 6[2]Miksch Robert R, Anthon Dougias W et al. Anal. Chem., 1981, 53(13): 2118.
  • 7[3]Jones S Bart, Terry Christopher M, Lister Tedd E et al. Anal. Chem., 1999, 71(18): 4030.
  • 8[4]Helaleh Murad I H, Kumemura Momoko, Korenaga Takashi et al. Analyst, 2001, 126: 104.
  • 9[5]Lazrus Allan L, Fong Laren L, Lind John A. Anal. Chem., 1988, 60(10): 1074.
  • 10[6]Maeda Yasuaki, Hu Xincheng, Itou Shigenao et al. Analyst, 1994, 119: 2237.

共引文献149

同被引文献988

引证文献9

二级引证文献41

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部