摘要
通过投加碳源的方法来强化水解—接触氧化组合工艺处理亚麻废水的能力,取得了较好的试验效果。在不加碳源时,CODCr的去除率仅为80.96%,出水CODCr高达795 mg/L。但当投加微生物易吸收利用的碳源之后,CODCr的去除率均>90.1%,尤其是从两处向系统投加碳源时,CODCr去除率>93%。所补充的碳源不仅增强了微生物的活性和数量,同时也提高了微生物的协同代谢能力,最终提高了系统对CODCr的去除能力。
By means of adding carbon source, the capability of hydrolytic - contact oxidation combination treatment process is strengthened. It obtains good results. Without adding carbon source, the COD removal rate is only 80.96%, and the effluent COD is as high as 795 mg/L. After adding carbon source which can absorb microbes easily, the COD removal rate is obviously improved, higher than 90.10%. The effluent COD removal rate exceeds 93.00%, especially when carbon source is added to the technology from 2 places. The carbon source supplied can not only increase the activity and amount of microbes, but also increase the capacity of coordination and metabolism of microbes.
出处
《工业水处理》
CAS
CSCD
北大核心
2006年第10期77-79,共3页
Industrial Water Treatment
关键词
亚麻废水
水解工艺
接触氧化工艺
flax wastewater
hydrolytic process
contact oxidation process