摘要
研究了单甘酯(HLB3.8)、卵磷脂(HLB3.5)和Span60(粉末、HLB4.7)3种低HLB值的乳化剂对软冰淇淋品质的影响,测定并对比了软冰淇淋浆料黏度和乳化稳定性以及软冰淇淋硬度、膨胀率、抗融性等物理特性指标,用显微镜观察了各试验组软冰淇淋的内部微观组织结构,阐述了3种乳化剂影响软冰淇淋品质的机理。结果表明,单甘酯对膨化率、硬度、抗溶性有比较理想的促进作用,综合效果最好,其理想添加量为0.4% ̄0.6%;span60的综合效果最差,不同用量的乳化稳定性没有变化,但对提高膨化率和硬度效果很好;卵磷脂综合效果居中,乳化稳定性随用量增加而增加。
The effect of lowering the HLB value of emulsifiers (Monoglyceride HLB 3.8, Lecithin HLB 3.5, Span 60 HLB 4.7) on the quality of soft-serve ice cream was studied by testing the following physical properties: the viscosity and emulsification-stabilization of the plasma, the rigidity, the overrun and the resistant-melted of soft-serve ice cream as well as observing its micro morphological tissue using a microscope with magnification 40. The effect mechanism of emulsifiers on quality was also illustrated in order to explain the results. The results showed that monoglyceride have a better effect on overrun, rigidity and resistant-melted in contrast with the other two kinds of emulsifiers. Span60 gave bad results, except for the overrun and the rigidity, and the emulsification-stabilization did not change while increasing the concentration. The effect of Lecithin on the quality of soft-serve ice cream was intermediate in contrast with the two other emulsifiers, and the emulsification-stabilization increased along with the dosage.
出处
《中国乳品工业》
CAS
北大核心
2006年第10期34-37,共4页
China Dairy Industry
基金
广东省科技厅地市重点引导项目(2004B26001143)
深圳市科技重点项目(深科信[2005]387号)
关键词
软冰淇淋
膨化率
抗溶性
硬度
微观形态学
乳化剂
soft-serve ice cream
overrun
resistant-melted
rigidity
micromorphology
emulsifiers