期刊文献+

Electrochemical behaviors of anodic alumina sealed by Ce-Mo in NaCl solutions 被引量:2

Electrochemical behaviors of anodic alumina sealed by Ce-Mo in NaCl solutions
下载PDF
导出
摘要 The elimination of toxic materials in sealing methods for anodic films on 1070 aluminum alloy was studied. The new process uses chemical treatments in cerium solution and an electrochemical treatment in a molybdate solution. Potentiodynamic polarization and electrochemical impedance spectroscopy(EIS) were used to study the influences of sealing methods on the corrosion behavior of anodic films in NaCl solutions. The results show that the Ce-Mo sealing makes the surface structure and morphology of anodic films uniform and compact. Ce and Mo produce a cooperative effect to improve the corrosion resistance of anodic films. Anodic films sealed by Ce-Mo provide high corrosion resistance both in acidic and basic solutions. The elimination of toxic materials in sealing methods for anodic films on 1070 aluminum alloy was studied. The new process uses chemical treatments in cerium solution and an electrochemical treatment in a molybdate solution. Potentiodynamic polarization and electrochemical impedance spectroscopy(EIS) were used to study the influences of sealing methods on the corrosion behavior of anodic films in NaCI solutions. The results show that the Ce-Mo scaling makes the surface structure and morphology of anodic films uniform and compact. Ce and Mo produce a cooperative effect to improve the corrosion resistance of anodic films. Anodic films sealed by Ce-Mo provide high corrosion resistance both in acidic and basic solutions.
出处 《中国有色金属学会会刊:英文版》 EI CSCD 2006年第5期1178-1183,共6页 Transactions of Nonferrous Metals Society of China
基金 Project(50571006) supported by the National Natural Science Foundation of China
关键词 铝合金 阳极镀层 密封 电化学阻抗谱 NACL溶液 1070 aluminum alloy anodic film sealing electrochemical impedance spectroscopy
  • 相关文献

参考文献2

二级参考文献19

  • 1曹发和,程英亮,张昭,张鉴清,王建明,曹楚南.LC4铝合金在氯化钠溶液中的孔蚀特征[J].中国有色金属学报,2002,12(z1):245-249. 被引量:4
  • 2M Turner. Anodized Architectural Aluminium combined with an Organic Seal[A]. Proceedings of the 8th International Aluminium Extrusion Technology Siminar, 515~523[C]. Orlando-Florida-USA,2004.
  • 3Patermarakis G, Papandreadis N. Effect of the structure of porous anodic Al2O3 films on the mechanism of their hydrothermal treatment[J]. Electrochemica Acta, 1993, 38(10): 1413-1420.
  • 4Celati N, Catherine M C S, Keddam M, et al. Takenouti. Electrchemical impedance spectroscopy characterization of the protection by anodized layers on aluminium alloys[J]. Materials Science Forum, 1995, 192-194: 335-344.
  • 5Lopez V, Otero E, Bautista A, et al. Sealing of anodic films obtained in oxalic acid baths[J]. Surface and Coatings Technology, 2000, 124(1): 76-84.
  • 6Bautista A, Gonzalez J A, Lopez V. Influence of triethanolamine additions on the sealing mechanism of anodized aluminum[J]. Surface and Coatings Technology, 2002, 154(1): 49-54.
  • 7Gonzalez J A, Lopez V, Bautista A. Characterization of porous aluminium oxide films from AC impedance measurements[J]. Journal of Applied Electrochemical, 1999, 29(2): 229-238.
  • 8Fanny S, Christime B, Georges M, et al. Characterisation of sealed anodic films on 7050 T74 and 2214 T6 aluminum alloys[J]. Surface and Coatings Technology, 2002, 154(1): 94-103.
  • 9Bonnel K, Pen C L, Pebere N. EIS characterization of protective coatings on aluminum alloys[J]. Electrochimica Acta, 1999, 44: 4259-4267.
  • 10ZUO Yu, ZHAO Peng-hui, ZHAO Jing-mao. The influences of sealing methods on corrosion behavior of anodized aluminum alloys in NaCl solutions[J]. Surface and Coatings Technology, 2003, 166: 237-242.

共引文献52

同被引文献14

  • 1Zuo Y, Zhao P H, Zhao J M. The influences of sealing methods on corrosion behavior of anodized aluminum alloys in NaC1 solutions [ J ]. Surface and Coatings Technology, 2003,166:237 - 242.
  • 2Bartolome M J, Lo pez V, Escudero E, et al. Changes in the specific surface area of porous aluminium oxide films during sealing[ J]. Surface & Coatings Technology, 2006, 200:4 530 - 4 537.
  • 3Fanny S, Christine B, Georges M, et al. Characterisation of sealed anodic films on 7050 T74 and 2214 T6 aluminium alloys [ J]. Surface and Coatings Technology, 2002, 154:94 - 103.
  • 4Suay J J, Gimenez E, Rodriguez T, et al. Characterization of anodized and sealed aluminium by EIS [ J ]. Corrosion Science, 2003,45:611 - 624.
  • 5Bautista A, Gonzalez J A, Lopez V. Influence of triethanolamine additions on the sealing mechanism of anodised aluminium[ J ]. Surface and Coatings Technology 2002, 154:49-54.
  • 6Yu X W, Cao C N. Electrochemical study of the corrosion behavior of Ce sealing of anodized 2024 aluminum alloy [ J ]. Thin Solid Films , 2003,423:252 -256.
  • 7Yu X W, Yan C W, Cao C N. Study on the rare earth sealing procedure of the porous film of anodized Al6061/ SiCp[ J]. Materials Chemistry and Physics, 2002, 76 : 228 - 235.
  • 8Zhao X H, Zuo Y , Zhao J M, et al. A study on the self- sealing process of anodic films on aluminum by EIS [ J ]. Surface & Coatings Technology, 2006,200:6 846-6 853.
  • 9周育红.LYl2铝合金阳极氧化膜稀土封闭工艺的研究[D].哈尔滨:哈尔滨工业大学,2005:26-29.
  • 10Kamada K, Fukuda H, Maehara K, et al. Insertion of SiO2 nanoparticles into pores of anodized aluminum by electrophoretic deposition in aqueous system[J]. Electrochemical and Solid- State Letters, 2004, 7 (8) : B25 - B28.

引证文献2

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部