期刊文献+

锌/碳纳米管复合电沉积薄膜性能研究 被引量:1

Research on the composite electrodeposition of zinc and carbon nanotube
下载PDF
导出
摘要 通过复合电沉积技术制备了纳米叠层锌/碳纳米管和光亮锌/碳纳米管2种复合薄膜,薄膜的拉曼光谱验证了锌与碳纳米管的共沉积。薄膜表面的场发射扫描电子显微镜观测显示碳纳米管表面的金属包覆层连续且均匀,预示着良好的界面结合。在2种薄膜的断口和裂纹处分别发现了被拔出基体和桥联的碳纳米管,证实了碳管对基体具有有效的增强作用。 The laminar nano-structural zinc/carbon nanotubes (CNTs) and the bright zinc/CNT composite films were prepared by composite electrodeposition. The Raman spectrometry analysis verified the codeposition of zinc and CNT. The zinc deposition on the surface of CNT was continuous and uniform, suggesting the high quality interracial connection. The pulling-out and bridging CNTs were found on the fracture surface and in the micro crack of the two composite films, respectively, proving the effective CNT reinforcement to the matrix,
出处 《电镀与涂饰》 CAS CSCD 2006年第11期13-16,共4页 Electroplating & Finishing
基金 上海市科委纳米专项基金(0452nm049 05nm05004) 上海市自然科学基金(05ZR14076)
关键词 碳纳米管 金属基复合材料 复合电沉积 薄膜 carbon nanotube metal matrix composite film composite electrodeposition film
  • 相关文献

参考文献18

  • 1WHITBY R L D,HSU W K,ZHU Y Q,et al.Novel nanoscale architectures:coated nanotubes and other nanowires[J].Philosophical Transactions:Mathematical,Physical and Engineering Sciences,2004,362 (1823):2127-2142.
  • 2HARRIS P J F.Carbon nanotube composite[J].International Material Reviews,2004,49 (1):31-43.
  • 3马仁志,朱艳秋,魏秉庆,梁吉,高志栋,吴德海.铁-巴基管复合材料的研究[J].复合材料学报,1997,14(2):92-96. 被引量:46
  • 4KUZUMAKI T,MIYAZAWA K,ICHINOSE H,et al.Processing of carbon nanotube reinforced aluminum composite[J].J Mater Res,1998,13:2445-2449.
  • 5XU C L,WEI,B Q,MA R Z,et al.Fabrication of aluminum/carbon nanotube composites and their electrical properties[J].Carbon,1999,37:855-858.
  • 6董树荣,涂江平,张孝彬.纳米碳管增强铜基复合材料的力学性能和物理性能[J].材料研究学报,2000,14(B01):132-136. 被引量:36
  • 7ZHANG Y,FRANKLIN N W,CHEN R J,et al.Metal coating on suspended carbon nanotubes and its implication to metal-tube interaction[J].Chemical Physics Letters,2000,331 (1):35-41.
  • 8KONG F Z,ZHANG X B,XIONG W Q,et al.Continuous Ni-layer on multiwall carbon nanotubes by an electroless plating method[J].Surface and Coatings Technology,2002,155:33-36.
  • 9CHEN X H,CHENG E Q,LI S L,et al.Electrodeposited nickel composites containing carbon nanotubes[J].Surface and Coatings Technology,2002,155 (2/3):274-278.
  • 10ARAI S,ENDO M,KANEKO N.Ni/deposited multi/walled carbon nanotubes by elecrodeposition[J].Carbon,2004,42:641-644.

二级参考文献47

共引文献156

同被引文献12

  • 1Iijima S, Ichihashi T. Single-shell carbon nanotubes of 1-nm diameter[J]. Nature, 1993, 363:603-605.
  • 2Wong W E, Sheehan P E, l.ieber C M. Nanobeam mechanicselasticity, strength, and toughness of nanorods and nanotubes[J]. Science, 1997, 277, 1971-1975.
  • 3Susumu Arai, Morinobu Endo. An investigation of the sliding wear behavior of Cu-matrix composite reinforced by carbon nanotubes [J]. Electrochemistry Communications, 2003, 5:797-799.
  • 4Xu C L, Wei, B Q, Ma R Z, et al. Fabrication of aluminum/ carbon nanotube composites and their electrical properties [J]. Carbon, 1999, 37: 855-858.
  • 5Kuzumaki T, Miyazawa K, Iehinose H, et al. Processing of carbon nanotube reinforced aluminum composite[J]. J. mater Res, 1998, 13:2445-2449.
  • 6Susumu Arai a. Ni-deposited multi-walled carbon nanotubes by Electrodeposition [J]. Carbon , 2004, 42: 641-644.
  • 7马仁志,朱艳秋,魏秉庆,梁吉,高志栋,吴德海.铁-巴基管复合材料的研究[J].复合材料学报,1997,14(2):92-96. 被引量:46
  • 8董树荣,张孝彬.纳米碳管增强铜基复合材料的滑动磨损特性研究[J].摩擦学学报,1999,19(1):1-6. 被引量:52
  • 9董树荣,涂江平,张孝彬.纳米碳管增强铜基复合材料的力学性能和物理性能[J].材料研究学报,2000,14(B01):132-136. 被引量:36
  • 10王浪云,涂江平,杨友志,张孝彬,陈卫祥,卢焕明.多壁纳米碳管/Cu基复合材料的摩擦磨损特性[J].中国有色金属学报,2001,11(3):367-371. 被引量:42

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部