等径弯曲通道变形工艺的研究及进展
Research and Development of Equal-channel Angular Pressing Process
摘要
综述了等通道转角挤压的工艺原理、剪切变形特征、不同工艺参数对显微组织及材料的性能的影响,对该工艺的前景进行了展望。
The basic principle,shear deformation and the technological parameters of equal-channel angular pressing (ECAP) were reviewed.The change of microstucture and mechanical properties of materials were discussed.The development of ECAP was introduced.
出处
《热加工工艺》
CSCD
北大核心
2006年第21期100-104,共5页
Hot Working Technology
参考文献37
-
1Furukawad M, Horita Z, Nemoto M. Review processing of metals by equal-channel angular pressing [J].Jourllal of Materiais Science,2001,36: 28-35.
-
2Mughrabi H,Coppel H WH, Kautz M. Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation[J]. Scripta Materialia,2004,51:807-812.
-
3Zubear,Ahmed ,Khan.Analysis of forming loads,microstructure development and mechanical property evolution during equal channel angular extrusion of a commercial grade aluminum alloy[J].Journal of Materials Processing Technology, 2003,135:59-67.
-
4Stolyarov V V, Zhu Yun-tian. Microstructure and properties of pure Ti processed by ECAP and cold extrusion[J].Materials Science and Engineering,2001 ,A303: 82- 89.
-
5Tabachnikova E D, Bengus V Z, Stolyarov V V, et al. The contribution of grain boundary dislocations to the plastic deformation of nanostructured titanium from the SD-effect of the yield stress [J].Materials Science and Engineering,2001,A309-310:524-527.
-
6LI Zben-hua, CHENG Xian-hua, SHANGGUAN Qian-qian.Effects of heat treatment and ECAE process on transformation behaviors of TiNi shape memory alloy [J].Materials Letters,2005,59: 705-709.
-
7Joon Yeon Chang, Geung Ho Kim,In Ge Moon.X-ray diffraction aanlysis of pure aluminum in the cyclic equal channel angular pressing[J].Scripta mater.,2001,44:331-336.
-
8Cao W Q, Godfrey A, Liu W, eat al.Annealing behavior of aluminium deformed by equal channel angular pressing [J].Materials Letters.003,57:3767- 3774.
-
9Lee S , Utsunomiya A , Akamatsu H ,et al. Influence of scandium and zirconium on grain stability and superplastic ductilities in ultrafine-grained Al-Mg alloys [J]. Acta Materialia,2002,50:553-564.
-
10ZhaoY H, Liao X Z, Jin Z,et al. Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing[J].Acta Materialia,2004,52:4589-4599.
二级参考文献113
-
1[24]Shin D H, Kim B C, Kim Y-S, Park K-T. Microstructure evolution in a commercial low carbon steel by equal channel angular pressing[J]. Acta mater, 2000,48: 2247 - 2255.
-
2[25]Shin D H, Kim B C, Park K-T, Choo W Y. Microstructural changes in equal-channel angular pressed low carbon steel by static annealing[J]. Acta mater, 2000, Vol.48: 3245 - 3252.
-
3[26]KimWJ,KimJ K, ChooWY, HongSI, Lee J D. Large strain hardening in Ti-V carbon steel processed by equal channel angular pressing [J]. Materials Letters,2001,51:177- 182.
-
4[27]Delo D P, Semiation S L. Finite-element modeling of nonisothermal equal-channel angular extrusion [ J ]. Metallurgical and Materials Transactions A, Vol. 30,1999,5:1391 - 1402.
-
5[28]Kim H S, Seo M H, Hong S I. Hastic deformation analysis of metals during equal channel angular pressing [J] .Journal of Materials Pro cessing Technology, 2001,113:622 - 626.
-
6[29]Segal V M. Equal channel angular extrusion:from macromechanics to structure formation [J]. Materials Science and Engineering, 1999, A271:322 - 333.
-
7[30]Stroica G M, Liaw P K. Progress in equal-channel angular processing[J]. JOM,2001,36 - 40.
-
8[31]Iwahashi Y, Wang J, Horita Z, Nemoto M and Longdon T G. Principle of equal-channel angular pressing for the processing of ultrafine grained materials [ J]. Scripta mater, 1996,35:143.
-
9[32]Aida T, Matsuki K,Horita Z,Langdon T G.Estimating the equivalent strain in equal-channel angular pressing [J]. Scripta mater, 2001, 44: 575 - 579.
-
10[33]Goforth R E, Hartwig K T, Conwell T G. In investigation and application of severe plastic deformation. ed. Lowe T C, valiev R Z. P. 3, Netherlands (2000).
共引文献142
-
1韦修勋,陈愿情,贾桂龙,何克准,谭自盟.半连铸7055铝合金扁锭偏析瘤缺陷分析及工艺优化[J].特种铸造及有色合金,2020(11):1290-1293. 被引量:3
-
2韩雄伟,杨金凤,胡享波.ECAP处理TC4钛合金数值模拟分析[J].特种铸造及有色合金,2020(11):1236-1239. 被引量:2
-
3刘国心,魏伟,魏坤霞.等通道变形高纯铝的显微组织与力学性能[J].机械工程材料,2008,32(6):66-69. 被引量:12
-
4李婷,赵西成,杨西荣.室温工业纯钛等径弯曲通道挤压的有限元模拟[J].稀有金属,2010,34(4):497-502. 被引量:2
-
5侯小虎,白朴存,刘飞,赵春旺,邢永明.喷射成形挤压态Al-12Zn-2.4Mg-1.1Cu-0.5%Ni合金显微组织研究[J].稀有金属材料与工程,2012,41(S2):101-104. 被引量:1
-
6陈凤光,孔建.基于Deform-3D在不同挤压比下镁合金棒材的有限元数值分析[J].煤炭技术,2015,34(1):316-319. 被引量:2
-
7戈晓岚.ECAP仿真与组织分析[J].三江高教,2010,0(2):27-32.
-
8罗蓬 ,胡侨丹 ,WU Xiao-lin ,XIA Ke-nong .Equal channel angular deformation process and its neuro-simulation for fine-grained magnesium alloy[J].中国有色金属学会会刊:英文版,2004,14(3):525-529.
-
9张郑,王经涛,赵西成.7475铝合金ECAP变形后的组织和性能[J].轻合金加工技术,2004,32(10):43-46. 被引量:3
-
10许晓嫦,刘志义,谭曼玲,刘跃军,吴纯.时效析出相在强变形过程中的室温回归现象[J].材料热处理学报,2004,25(6):71-75. 被引量:2
-
1王快社,王文,徐可为.等径弯曲通道变形镁合金的搅拌摩擦焊接[J].航空材料学报,2007,27(3):51-54.
-
2张杰,张政,闫华,张培磊,卢庆华,于治水.铜和铜合金表面激光熔覆最新研究及进展[J].材料导报,2014,28(21):68-72. 被引量:8
-
3任耀剑,江利.耐磨材料的研究及进展[J].矿山机械,2005,33(6):73-76. 被引量:28
-
4邢海生,林峰,潘邻.奥氏体不锈钢表面强化技术研究及进展[J].热处理技术与装备,2011,32(2):1-6. 被引量:6
-
5夏劲武,徐家文,赵建社.电火花加工表面质量的研究及进展[J].电加工与模具,2008(6):11-15. 被引量:14
-
6王会阳,安云岐,李承宇,晁兵.稀土在铝和铝合金中应用的研究及进展[J].稀土,2012,33(1):74-80. 被引量:63
-
7马正斌,刘金合,卢施宇,王世清.电子束焊接技术研究及进展[J].电焊机,2012,42(4):93-96. 被引量:18
-
8王庆娟,张平平,杜忠泽,王静怡.等径弯曲通道变形制备超细晶铜的热稳定性[J].材料热处理学报,2012,33(8):105-109. 被引量:3
-
9黄久贵,李宁,蒋丽敏,周德瑞.镀锡板耐蚀性研究及进展[J].电镀与环保,2003,23(6):5-9. 被引量:27
-
10印仁和,陈溪芳.PVD镀膜技术研究及进展[J].安徽工学院学报,1993,12(4):7-13.