期刊文献+

SYNTHESIS,CHARACTERIZATION,THERMAL DEGRADATION AND ELECTROCHEMICAL PROPERTIES OF OLIGO-4-m-TOLYLAZOMETHINEPHENOL

SYNTHESIS, CHARACTERIZATION, THERMAL DEGRADATION AND ELECTROCHEMICAL PROPERTIES OF OLIGO-4-m- TOLYLAZOMETHINEPHENOL
下载PDF
导出
摘要 The oxidative polycondensation reaction conditions of 4-m-tolylazomethinephenol (4-TAMP) in the presence of air O2 and NaOCl as oxidants were studied in an aqueous alkaline medium between 50 and 90℃. The structures of the obtained monomer and oligomer were confirmed by FT-IR, UV-Vis, ^1H- and ^13C-NMR and elemental analysis techniques. The physical characterization was made by TG-DTA, size exclusion chromatography (SEC) and solubility tests. At the optimum reaction conditions, the yield of oligo-4-m-tolylazomethinephenol (O-4-TAMP) was found to be 62.50% (for air O2 oxidant) and 90.0% (for NaOCl oxidant), respectively. According to the SEC analysis, the number-average molecular weight (Mn), weight-average molecular weight (Mw) and polydispersity index (PDI) values of O-4-TAMP were found to be 2310, 2610 g tool 1 and 1. 13, respectively, using air O2, and 1390, 1710 g mol^-1 and 1.23, using NaOCl, respectively. According to TG-DTA analyses, O-4-TAMP was more stable than 4-TAMP against thermal decomposition. The weight losses of 4-TAMP and O-4-TAMP were found to be 68% and 58% at 1000℃. Electrical conductivity of the O-4-TAMP was measured, showing that the polymer is a typical semiconductor. Electrochemically, the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO) and electrochemical energy gaps (E'g) for 4-TAMP are -5.96, -3.22 and 2.74 eV, respectively. The HOMO, LUMO and (E'g) for O-4-TAMP are -5.78, -3.44 and 2.34 eV, respectively. According to UV-Vis measurements, optical band gaps (Eg) of 4-TAMP and O-4-TAMP were found to be 3.45 and 3. 1 0 eV, respectively. The oxidative polycondensation reaction conditions of 4-m-tolylazomethinephenol (4-TAMP) in the presence of air O2 and NaOCl as oxidants were studied in an aqueous alkaline medium between 50 and 90℃. The structures of the obtained monomer and oligomer were confirmed by FT-IR, UV-Vis, ^1H- and ^13C-NMR and elemental analysis techniques. The physical characterization was made by TG-DTA, size exclusion chromatography (SEC) and solubility tests. At the optimum reaction conditions, the yield of oligo-4-m-tolylazomethinephenol (O-4-TAMP) was found to be 62.50% (for air O2 oxidant) and 90.0% (for NaOCl oxidant), respectively. According to the SEC analysis, the number-average molecular weight (Mn), weight-average molecular weight (Mw) and polydispersity index (PDI) values of O-4-TAMP were found to be 2310, 2610 g tool 1 and 1. 13, respectively, using air O2, and 1390, 1710 g mol^-1 and 1.23, using NaOCl, respectively. According to TG-DTA analyses, O-4-TAMP was more stable than 4-TAMP against thermal decomposition. The weight losses of 4-TAMP and O-4-TAMP were found to be 68% and 58% at 1000℃. Electrical conductivity of the O-4-TAMP was measured, showing that the polymer is a typical semiconductor. Electrochemically, the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO) and electrochemical energy gaps (E'g) for 4-TAMP are -5.96, -3.22 and 2.74 eV, respectively. The HOMO, LUMO and (E'g) for O-4-TAMP are -5.78, -3.44 and 2.34 eV, respectively. According to UV-Vis measurements, optical band gaps (Eg) of 4-TAMP and O-4-TAMP were found to be 3.45 and 3. 1 0 eV, respectively.
出处 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 2006年第6期647-656,共10页 高分子科学(英文版)
基金 This work was supported by TUBITAK and DPT Grants Commission for a research grant (No. TBAG-2451 (104T062)).
关键词 Air O2 NAOCL Oligo-4-m-tolylazomethinephenol Oxidative polycondensation Thermal analysis Band gap CONDUCTIVITY Air O2 NaOCl Oligo-4-m-tolylazomethinephenol Oxidative polycondensation Thermal analysis Band gap Conductivity
  • 相关文献

参考文献20

  • 1Katon, J.E., "Organic Semiconducting Polymers", Marcel Dekker, New York, 1968
  • 2Suh, S.C. and Shim, S.C., Synthetic Metals, 2000, 114(1): 91
  • 3Mamedov, B.A., Vidadi. Yu.A., Alieva, D.N. and Ragimov, A.V., Polym. Int., 1997, 43(2): 126
  • 4Ragimov, A.V., Mamedov, B.A. and Gasanova, S.G., Polym. Int., 1997, 43(4): 343
  • 5Baughman, R.H., Bredas, J.L., Chance, R.R., Elsenbaumer, R.L. and Shacklette, L.W., Chem. Rev., 1982, 82. 209
  • 6Kaya,I. and Senol, D., J. Appl. Polym. Sci., 2003, 90(2): 442
  • 7Diaz, F.R., Moreno, J., Tagle, L.H., East, G.A. and Radic, D., Synthetic Metals, 1999, 100(2): 187
  • 8Aly, K.I. and Khalaf, A.A., J. Appl. Polym. Sci., 2000, 77(6): 1218
  • 9Mel'nikova, M.A., Mustafaev, R.N. and Ragimov, A.V., Zh. Prikl. Khim., 1991, 64(5): 1930
  • 10Kaya,I., Demir, H.O. and Vilayetoglu, A.R., Synthetic Metals, 2002, 126(2, 3): 183

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部