摘要
采取熔融共混方法制备了聚醚醚酮(PEEK)和聚酯液晶(TLCP)二元和三元增容共混物,用DSC和PLM对共混物的结晶行为和结晶形态进行了研究.结果表明,TLCP的存在使PEEK的结晶温度和结晶起始温度均略有升高,增容剂(RCP)的加入延缓了PEEK结晶过程.等温结晶动力学研究表明,液晶的加入加快了聚醚醚酮的结晶速度,但随其含量增加结晶速度降低.与二元共混物相比,加入增容剂后对聚醚醚酮的结晶速度基本无影响.增容后的聚醚醚酮球晶的尺寸下降,很难看到Maltese十字消光.
A fully aromatic liquid crystalline polyester (TLCP) was blended with poly( ether ether ketone), PEEK. Random copolymer (RCP) was used as the compatibilizer in the blends. The isothermal crystallization kinetics and morphologies of compatibilized blends were studied with differential scanning calorimetry ( DSC ) and polar light micrograph (PLM). TLCP acted as a heterogenous nucleation sites to accelerate the crystallization of PEEK. However, PEEK crystallization rate decreased with increasing TLCP fraction. Isothermal crystallization exotherms showed that the addition of RCP showed no significant influence on the crystallization of PEEK in blends. PLM observation showed that it was difficult to discern the single PEEK spherulites.
出处
《吉林大学学报(理学版)》
CAS
CSCD
北大核心
2006年第6期984-988,共5页
Journal of Jilin University:Science Edition
基金
国家军工配套研制项目基金(批准号:MK-PT02-270(ED)BQ-2002-046)
关键词
聚醚醚酮
聚酯液晶
共混物
增容剂
等温结晶
球晶
poly( ether ether ketone)
thermotropic liquid crystalline polyester
blends
compatibilizer
isothermal crystallization
spherulites