期刊文献+

理想情况下法兰连接系统的密封模糊可靠性

Sealing Fuzzy Reliability of Flanged Connection System under the Ideal Case
下载PDF
导出
摘要 现代工业对法兰联接系统的密封可靠性提出了越来越高的要求。文中对理想情况下法兰的密封模糊可靠度进行了较为详细的研究。算例结果表明,文中的分析方法是可行的。 The higher sealing reliability of flanged systems in raodern industry is demanded because the leakage of a flanged system will cause environment population, huge economic and personnel losses, The sealing fuzzy reliability of a flanged system is investigated under the ideal case. The result of calculating example shows the analysis method is feasible.
出处 《弹箭与制导学报》 CSCD 北大核心 2006年第4期188-191,共4页 Journal of Projectiles,Rockets,Missiles and Guidance
关键词 法兰连接系统 垫片 密封模糊可靠度 flanged connection system gasket sealing fuzzy reliability
  • 相关文献

参考文献7

  • 1张庆雅,汪亮.垫片螺栓法兰连接系统的载荷与变形分析[J].机械科学与技术,2004,23(1):33-36. 被引量:11
  • 2杜培德,蔡仁良.螺栓法兰连接系统紧密性的简化分析方法[J].润滑与密封,1990,15(5):15-21. 被引量:7
  • 3顾伯勤 朱洪生.螺栓法兰连接的紧密性分析[J].石油化工设备,1988,17(1):16-20.
  • 4Raut H D,Leon G F.Report of Gasket Factor Tests[J].WRC Bulletin,1977,(233):1-19.
  • 5Bazergui A,Marchand L.PVRC Milestone Gasket Tests-first Results[J].WRC Bulletin,1984,(292):1-36.
  • 6Bazergui A,Marchand L,Raut H D.Development of a Production Test Procedure for Gaskets[J].WRC Bulletin,1985(309):1-39.
  • 7Payne J R,Schneider R W.Comparison of Proposed ASME Rules for Bolted Flanged Joints[A].International Conference on Pressure Vessel Technology[C].1996,147-155.

二级参考文献10

  • 1杜培德,刘纪炎.螺栓法兰连接系统的载荷变形关系分析[J].青岛化工学院学报(自然科学版),1995,16(1):70-76. 被引量:5
  • 2杜培德 蔡仁良.螺栓法兰连接系统紧密性的简化分析方法[J].青岛化工学院学报,1998,.
  • 3Waters E O, et al. Formulas for stress in bolted flange connections[J]. Transcations of the ASME, 1939,59 : 161 - 169.
  • 4Soler A I. Analysis of bolted joints with nonlinear gasket behavior[J]. Transactions of the ASME, Journal of Pressure Vessel Technology, 1980,102.
  • 5Sawa T. A stress analysis of pipe flange connections[J]. Transactions of the ASME, Journal of Pressure Vessel Technology, 1991,113.
  • 6Sawa T. A simple method to calculate the force ratio of bolted joints[J]. Bulletin of the JSME, 1983,26.
  • 7Singb K P. Design parameters affecting bolt load in ring-type gasketed joints[ J]. Transactions of the ASME, Journal of Pressure Vessel Technology, 1983,105.
  • 8蔡仁良,郑建荣.柔性石墨缠绕垫管法兰连接的试验研究[J]石油化工设备,1988(04).
  • 9高忠白,黄寿辉,蔡仁良,周慧君.膨胀石墨缠绕垫常温密封性能试验[J]石油化工设备,1985(07).
  • 10张庆雅,汪亮,孙东.遗传算法在固体发动机结构可靠性计算中的应用[J].固体火箭技术,2002,25(2):13-17. 被引量:10

共引文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部