单织轴喷气织机织造联合组织织物的实践

Practice of Weaving Joint Stitch Fabric in Single Loom Beam Air-jet Loom

为了在单织轴喷气织机上顺利生产平纹加缎纹条联合组织织物,对纱线的强力、条干CV等方面提出了更高的要求。整经工序要合理排放筒子,并合理设置张力垫圈重量;浆纱工序要采用预湿上浆,且上浆率偏小掌握;织造工序要合理设置开口时间、后梁高度、上机张力、开口角度,并合理安排穿综及穿筘工艺,保证了经纱不起圈,且织造效率提高。

To produce join stitch fabric which is combined plain weave with stain in single loom bean air-jet loom, higher demand for yarn strength and evenness CV were proposed. Arranging cheese reasonably, set suitable tension washer weight should be adopted in warping process. Pre-wetting sizing and smaller sizing percentage should be adopted in sizing process. Arranging opening time, back beam height, tension, Opening angle, drafting, reed-in reasonably were adopted in weaving process. These practice ensures no loop and enhance weaving efficiency.