期刊文献+

热载荷对双金属复合管结合强度的影响

Influence of Heat Load to Glued Strength of Bimetal Composite Pipe
下载PDF
导出
摘要 分析了在热载荷作用下双金属复合钢管结合强度的变化,研究了经历温度循环后内外层管之间出现松脱的可能性;研究表明当复合管处于热加载状态时,复合管存在着极限工作温度,残余接触压力在温度升高后回复到室温状态时值最小;并通过实验得到了验证。 The change of glued strength of bimetal composite pipe under the action of heat load was analyzed in this article. The possibility of separation between two metal layers in temperature cycle was researched. It has been shown that under heat loading condition, the working temperature limit of composite pipe exists. The residue contact stress would be decreased when the temperature elevate first then return to room temperature, which has been proved by experiment.
机构地区 浙江工业大学
出处 《化工设备与管道》 CAS 2006年第6期55-58,共4页 Process Equipment & Piping
关键词 热载荷 复合管 松脱 残余接触压力 heat load, composite pipe, separation, residue contact stress
  • 相关文献

参考文献7

  • 1陈海云,曹志锡.双金属复合管塑性成形技术的应用及发展[J].化工设备与管道,2006,43(5):16-18. 被引量:39
  • 2徐鸿.胀接接头弹塑性分析和在换热器上的应用[J].压力容器,1986,3(5):39-45.
  • 3曹桂荣等.金属塑性成形力学原理[M].北京:北京工业大学出版社,1999
  • 4黄载生等.弹性力学与应用[M].杭州:浙江大学出版社,1995
  • 5王志义.化工容器设计[M].北京:化学:工业出版社,1998
  • 6化工设备设计全书.超高压容器设计[M].上海:上海科学技术出版社,1990
  • 7CJ/T 192-2004内衬不锈钢复合钢管[S].

二级参考文献12

  • 1樊新民,徐天祥.Ta—10W衬管与钢管段的爆炸复合[J].稀有金属材料与工程,1995,24(2):55-59. 被引量:2
  • 2俞家正.金属复合管及制作方法和管接头[P].中国,F16L9/14,96123012.6.1998.
  • 3章新生.一种可用于双金属管和内壁耐磨金属管生产的方法[P].中国,B21D39/10,97101519.8.1998.
  • 4徐鸿.胀接接头弹塑性分析和在换热器上的应用[J].压力容器,1986,3(5):39-45.
  • 5[日]特许公报(B2)平2-9543.
  • 6赵秀华.耐压耐蚀复合管和制造工艺[P].CN87103183A,1986.
  • 7易思竞.一种金属复合管[P].CN2268167Y,1997.
  • 8[日]特许公报(B2)昭62-3683.
  • 9Flatley T, Thursfield T. Review of corrosion resistance co - extruded tube development for power boilers. Conference on Coatings and Bimetallics for Energy Systems and Chemical Process Environ - meritsin South Carolina, 1984, 18 -22.
  • 10王学生,李培宁,郭茶秀.不锈钢复合管液压胀接装置[J].机械工程师,2001(2):10-11. 被引量:35

共引文献46

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部