期刊文献+

大功率同步电机直接转矩控制系统 被引量:9

High-power Synchronous Motor Direct Torque Control System
下载PDF
导出
摘要 针对大型煤矿主井提升同步电机变频调速系统中大功率同步电机的直接转矩控制(DirectTorqueControl,简称DTC)系统进行了深入研究;并对其实际系统进行了性能测试。测试结果表明,该系统性能良好,提升效率明显高于同类型设备,能耗大幅度下降。本研究为较好地消化吸收国外先进的变频调速技术,也为我国新建矿井的提升电控系统以及电控系统的国产化提供了理论和技术支持。 In view of the synchronous motor variable-frequency adjustable-speed system of large-scale coal mine hoist equipment,this thesis conductes the thorough research to the direct torque control system of high power synchronous machine,and carries on the performance test to the actual system,The test result expressed this system performance is excellent;the lifting efficiency obviously is higher than the same type equipment ,and the energy consumption drops large scale. In order to digest and assimilate advanced variable-frequency adjustable-speed technology of import equipment better, the paper provides the theory and the technical support for new built mine hoist electrical control system as well as its domestic manufacture.
出处 《电力电子技术》 CSCD 北大核心 2006年第6期22-24,共3页 Power Electronics
关键词 同步电机 控制 变频调速/直接转矩控制 synchronous motor control variable-frequency adjustable-speed/DTC
  • 相关文献

参考文献4

二级参考文献18

  • 1Gaupp O, Gruening H E,Kreienbuehl M,et al. Experience with High Power Frequency Converters Employing Advanced GTO (IGCT) Series Connection [A]. Power Engineering Society Winter Meeting,IEEE,2000 [C].2000,4: 2519~2523.
  • 2Kuhn H, Schrbder D A. New Validated Physically Based IGCT Model for Circuit Simulation of Snubberless and Series Operation [A].Industry Applications Conference,2000[C].2000,5:2866-2872.
  • 3Nagel A,Bernet S,Bruckner T,et al. Characterization of IGCTs for Series Connected Operation [A].Industry Applications Conference,2000[C]. 2000,3:1923-1929.
  • 4TAKAHASHI I, TOSHIHIKO N. A new quick-response and high-efficiency control strategy of an induction motor[J].IEEE Trans Ind Applicat, 1986, IA-22(Sept / Oct): 820-827.
  • 5DEPENBROCK M. Direct self-control(DSC) of inverterfed induction machine [J]. IEEE Trans Power Electron, 1988PE-3 (10): 420-429.
  • 6RAHMAN F M, ZHONG L, LIM K W, A direct torquecontrolled interior permanent magnet synchronous motor drive incorporating field weakening [J]. IEEE Transactions on Industry Applications, 1998, 34(6): 1 246-1253.
  • 7RAHMAN M F, ZHONG L. Voltage switching tables for DTC controlled interior permanent magnet motor [A].IECON' 99 Proceedings[C]. Industrial Electronics Society,1999 Vol 3, 1445-1451.
  • 8RAHMAN M F, ZHONG L. Problems of stator flux oriented torque controllers for the interior permanent magnet motor[A]. Power Electronics and Motion Control Conference[C]. The Third International, 2000. Vol 1, 342-345.
  • 9NOGUCHI T, YAMADA K, KONDO S, et al. Initial rotor position estimation method of sensorless PM synchronous motor with no sensitivity to armature resistance [J]. IEEE Transactions on Industrial Electronics, 1998,45(1):118-125.
  • 10HAQUE M E, ZHONG L, RAHMAN M F. A sensorless initial rotor position estimation scheme for a direct torque controlled interior permanent magnet synchronous motor drive[A]. Applied Power Electronices Conference and Expostion, Anaheim [C]. CA USA: IEEE, 2001, vol 2, 879-884.

共引文献45

同被引文献46

引证文献9

二级引证文献49

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部