摘要
在横向剖面法研究的基础上,选取30度和60度倾斜良导体模型,利用有限元三维数值模拟方法,对比研究横向剖面法和常规剖面法的异常特征.研究结果表明:两方法对断层的倾向都有较好反映,对倾角难以判定.为研究倾角定量化判定,本文提出了横向剖面电阻率成像方法与常规的电阻率层析成像方法对比研究,结果表明:两者均较准确的反映出断层的倾角变化,前者效果略优于后者.
Based on the research on the transverse profiling method, the research has selected an oblique conductor model of 30° and 60°, and then utilizes the finite element numerical modeling method to compare the abnormal characteristics of transverse profile method with that of the common profiling method. The findings show that two methods all can reflect the trend of fault rather well, but cannot define the dip angle. In order to judge the dip angle from the magnitude, this paper tries the comparative study on the transverse profiling electric-resistivity imaging method and the common electric-resistivity imaging method, and the findings show that the two methods all can reflect the variation of dip angle of fault rather precisely, but the effect of previous one is better than that of the latter.
出处
《地球物理学进展》
CSCD
北大核心
2006年第4期1296-1301,共6页
Progress in Geophysics
基金
城市活动断层探测
课题编号(SD1501)
山东省地震局博士基金资助项目
课题编号(sddzj0501)联合资助
关键词
对称四极
横向剖面法
数值模拟
倾斜良导体
横向剖面电阻率层析成像
schlumberger, transverse array profiling method, numerical modeling, oblique good conductor, electric-resistivity tomographic imaging of transverse profile