期刊文献+

永磁同步电动机伺服系统的直接反馈线性化控制 被引量:4

Direct Feedback Linearization Control of Permanent Magnet Synchronous Motor Servo System
下载PDF
导出
摘要 应用一种非线性控制方法-直接反馈线性化理论,通过对输出变量进行李微分,得到所需的的坐标变换和非线性系统状态反馈,实现了永磁同步电机系统的输入输出线性化,同时也实现了系统的解耦。仿真结果表明:采用该控制方法的永磁同步电动机伺服系统具有良好的位置跟踪性能,而且能够有效降低转矩变化对位置跟踪性能的影响。 The direct feedback linearlzation (DFL) theory, which was a nonlinear control method, was employed to control PMSM in this paper. The appropriate coordinate transformation and nonlinear state feedback were obtained by Lie derivatives for output variable, with which the input - output of PMSM system was linearized. Furthermore, the completely dynamic decoupling was realized. The simulation results showed that the permanent magnet synchronous motor servo system with the method proposed in the paper not only has better position tracking performance, but also efficiently reduced the effect of torque change on position tracking.
机构地区 内蒙古工业大学
出处 《微特电机》 北大核心 2006年第12期26-28,共3页 Small & Special Electrical Machines
基金 内蒙古工业大学校基金重点资助
关键词 永磁同步电动机 位置跟踪 直接反馈线性化 李微分 PMSM position tracking direct feedback linearization lie derivatives
  • 相关文献

参考文献11

二级参考文献27

  • 1陈伯时,徐荫定.电流滞环控制PWM逆变器异步电动机的非线性解耦控制系统[J].自动化学报,1994,20(1):50-57. 被引量:27
  • 2高龙,王幼毅,马海武.非线性系统的DFL及隐动态[J].清华大学学报(自然科学版),1996,36(9):1-8. 被引量:19
  • 3郭庆鼎.交流伺服系统[M].北京:机械工业出版社,1992..
  • 4李春文 冯元琨.多变量非性性控制的逆系统方法[M].北京:清华大学出版社,1990..
  • 5夏小华 高为炳.非线性解耦控制理论[M].北京:科学出版社,1993..
  • 6曹建荣.多变量非线性解耦控制在感应电动机变频调速中的应用[硕士学位论文].西安:西安矿业学院,1996..
  • 7[1]Peter Vas. Sensorless vector and direct torque control[M]. New York: Oxford University Press, 1998.
  • 8[3]Isidori A. Nonlinear control systems[M]. 2nd Edition, Springer-Verlag, 1989.
  • 9[7]Luca A D, Ulivi G.. Design of an exact nonlinear controller for induction motors[J]. IEEE Trans. AC., 1989,34(12):1304-1307.
  • 10[8]Marino R, Peresada, S, Valigi P. Adaptive input-output linearzing control of induction motors[J]. IEEE Trans. AC., 1993,38(2):208-221.

共引文献239

同被引文献37

引证文献4

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部