摘要
An electromagnetic microactuator with two stable positions is presented. The actuator consists of a cantilever beam with two free ends, a torsional beam with two fixed ends, planar coils and permanent magnets. The cantilever beam has two stable positions due to the use of permanent magnets. With electromagnetic actuation arising from the planar coils, the cantilever beam will switch from one stable position to the other. Mechanical and magnetic analysis are carried out on the actuator, and the device with a size of 2.2 mm × 2.5 mm is fabricated with the UV-LIGA technology. The test results show that a current pulse with an amplitude of 70 mA is needed for actuator＇ s switching between the two stable states, and the switching time is no more than 6 ms. Displacement of the end of cantilever is about 15 μm.
An electromagnetic microactuator with two stable positions is presented. The actuator consists of a cantilever beam with two free ends, a torsional beam with two fixed ends, planar coils and permanent magnets. The cantilever beam has two stable positions due to the use of permanent magnets. With electromagnetic actuation arising from the planar coils, the cantilever beam will switch from one stable position to the other. Mechanical and magnetic analysis are carried out on the actuator, and the device with a size of 2.2 mm × 2.5 mm is fabricated with the UV-LIGA technology. The test results show that a current pulse with an amplitude of 70 mA is needed for actuator＇ s switching between the two stable states, and the switching time is no more than 6 ms. Displacement of the end of cantilever is about 15 μm.
基金
Projece supported by National Natural Science Foundatin ofChina(Grant No .10377009)
National High-Technology Researchand Development Program(Grant No .863 -2003AA404140)
Science Foundation of National Information Industry Ministry ofChina(Grant No .41308050116)
