2EMMANUEL N C, AZRAIL A. Thermal response of thermoacoustic refrigerating system to variable loading[C]// Collection of Technical Papers - 5th International Energy Conversion Engineering Conference. New Jersey USA: A- merican Institute of Aeronautics and Astronautics Inc. 2007(2)..657-665,.
3LAVRENCHENKOG K, ZMITROCHENKO J V, NESTERENKO S M, et al. Characteristics of voorhees refrig- erating machine with hermetic piston compressor producing refrigeration at one or two temperature levels[J]. Inter- national Journal of Refrigeration, 1997, 20(7):517-527.
4BUYANOV Y L, VESELOVSKII A S, BAEV V P. Determination of the rdrigerating capacity of cryogenic gas machines for cooling current leads containing high-temperature superconductors[J]. Journal of Engineering Physics and Thermophysics, 2011, 84(3): 678-688.
5ANDREY R, VJACHESLAV N. Investigation of the starting modes of the low-temperature refrigerating machines working on the mixtures of refrigerants[J]. International Journal of Refrigeration, 2009, 32(5) : 901-910.
6McClain, RODNEY L. ARTURO P V, et al. Neural network analysis of fin-tube refrigerating heat exchanger with limited experimental data[J]. International Journal of Heat and Mass Transfer, 2001, 44(4)..763-770.
7MASTRULLO R, MAURO A W, TINO Set al. A chart for predicting the possible advantage of adopting a suction/liq- uid heat exchanger in refrigerating system[J]. Applied Thermal Engineering, 2007, 27 (14/15) : 2443-2448.
8LATRA B, ANDRE L. Modeling of an ejector rerigerating system operating in dimensioning and off-dimensioning conditions with the working fluids R142b and R600a[J]. Applied Thermal Engineering, 2009, 29(2/3):265-274.
9CABELLO R, SANCHEZ D, LLOPIS R. Experimental evaluation of the energy efficiency of a COz refrigerating plant working in transcritical conditions[J]. Applied Thermal Engineering, 2008, 28(13)..1596-1604.
10RISTO C, ZAHID A H. New technologies in ammonia refrigerating and air-conditioning systems[J]. Heat Trans- fer Engineering, 2009, 30(4) :324-329.
