期刊文献+

钛合金热变形机制及微观组织演变规律的研究进展 被引量:31

Progress on Hot Deformation Mechanisms and Microstructure Evolution of Titanium Alloys
下载PDF
导出
摘要 综述了当前国内外钛合金在热加工过程中的变形机制及微观组织演变规律方面的研究成果。主要讨论了α,α+β和β钛合金在β区、α区或α+β两相区热变形的流变曲线特征,应力指数和变形激活能参数,α相和β相的变形方式、再结晶和回复以及α+β两相组织的球化等组织演变机制及规律。 Research findings of the hot deformation mechanisms and microstructure evolution of titanium alloys abroad and at home currently are summarized. Characteristics of hot deformation curves, stress exponents and apparent activation energy parameters for α, α-β and β titanium alloys deforming in β, α or α+β fields, deformation patterns and recrystallization and recovery of α and β phases, globularization of a and β lamellar structure were discussed mainly.
出处 《材料工程》 EI CAS CSCD 北大核心 2007年第1期60-64,共5页 Journal of Materials Engineering
关键词 钛合金 热变形 微观组织 titanium alloy hot deformation microstructure
  • 相关文献

参考文献31

  • 1НОШКИН Н Ф, ЕРМАНОК М З. Полуфабрнкаты из Титановых Сплавов[M]. Москва: ОНТМ ВИЛС, 1996.11-36.
  • 2BRUN M, ANOSHKIN N, SHAKHANOVA G. Physical processes and regimes of thermo-mechanical processing controlling development of regulated structure in the α+β titanium alloys[J]. Mater Sci Eng, 1998, A243:77-81.
  • 3WEISS I, SEMIATIN S L. Thermo-mechanical processing of alpha titanium alloys-an overview[J]. Mater Sci Eng, 1999,A263: 243-256.
  • 4WEISS I, SEMIATIN S L. Thermo-mechanical processing of beta titanium alloys-an overview[J]. Mater Sci Eng, 1998,A243:46-65.
  • 5SESHACHARYULU T, MEDEIROS S C, MORGAN J T, et al. Hot deformation mechanisms in ELI grade Ti-6AI-4V[J].Scripta Mater, 1999,41 (3) :283-288.
  • 6SESHACHARYULU T, MEDEIROS S C, MORGAN J T, et al. Hot deformation and micro-structural damage mechanisms in extra-low interstitial (ELI) grade Ti-6AI-4V[J]. Mater Sci Eng,2000, A279 : 289- 299.
  • 7SESHACHARYULU T, MEDEIROS S C, FRAZIER W G, et al. Hot working of commercial Ti-6Al-4V with an equiaxed α-β microstructure: materials modeling consideration[J]. Mate Sci Eng, 2000, A284 : 184- 194.
  • 8PRASAD Y V R K, SESHACHARYULU T, MEDEIROS S C,et al. Influence of oxygen content on the forging response of equiaxed (α+β) preform of Ti-6Al-4V: commercial vs ELI grade[J].J Mat Proc Tech, 2001,108 : 320- 327.
  • 9SESHACHARYULU T, MEDEIROS S C, FRAZIER W G, et al. Microstructural mechanisms during hot working of commercial grade Ti-6Al-4V with lamellar starting structure[J]. Mater Sci Eng, 2002 ,A325 : 112- 125.
  • 10MILLER R M, BIELER T R, SEMIATIN S L. Flow softening during hot working of Ti-6Ak-4V with a lamellar colony microstructure[J]. Scripta Mater, 1999,40 (12) : 1387- 1393.

二级参考文献25

  • 1苏祖武,姚泽坤,郭鸿镇,刘建超,刘建宇,崔健,刘果青,姜明,应志毅.TC11钛合金双性能盘研究[J].金属学报,1996,32(4):377-381. 被引量:13
  • 2陈玉文.β钛合金及其在宇航工业中的应用[J].稀有金属,1996,20(4):297-300. 被引量:23
  • 3索郎宁娜OⅡ 格拉诺夫CГ.热强钛合金[M].航空部六二一研究所,..
  • 4田长生.金属材料及热处理[M].航空专业教材审编室,1984..
  • 5丰建明.变形高温合金的本构关系及其应用:硕士论文[D].西北工业大学,1997.
  • 6工程材料实用手册编委.工程材料实用手册(3)铝合金镁合金钛合金[M].中国标准出版社,1989..
  • 7西北工业大学有色金属锻造组.有色金属锻造[M].北京:国防工业出版社,1979..
  • 8鲍利索娃(苏).钛合金金相学[M].北京:国防工业出版社,1986..
  • 9周义刚.Ti-679合金热稳定性的研究.金属学报,1980,16(3):302-302.
  • 10[1]Committee for Handbook of Engineering Materials(工程材料实用手册编委 ). Handbook of Engineering Materials(3)(工程材料手册 )[M]. Beijing: China Standard Press, 1989: 632~651

共引文献130

同被引文献255

引证文献31

二级引证文献150

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部