1[4]Liu Ying,Zhang Xiaobo,Jiang Xiuying,et al.High efficiency top surface-emitting lasers fabricated by four implantation using tungsten wire as mask.Appl Phys Lett,1995,57(24):3549
2[5]Liu Ying,Du Guotong,Wang Zhiling,et al.Vertical-cavity surface-emittinglaser fabricated by two implantations using tungsten wires as mask.Optical and Quantum Electronics,1996,28:1781
3Dallesasse J M,Holonyak N Jr,Sugg A R,et al.Hydrolyza-tion oxidation of AlxGa1-xAs-AlAs-GaAs quantum well heterostructures and superlattices.Appl Phys Lett,1990,57(26):2844
4Huffaker D L,Graham L A,Deng H,et al.Sub-40μA continuous-wave lasing in an oxidized vertical-cavity surface-emitting laser with dielectric mirrors.IEEE Photonics Technol Lett,1996,8:974
5Huffaker D L,Deppe D G.Low threshold vertical-cavity surface-emitting lasers based on high contrast distributed Bragg reflectors.Appl Phys Lett,1997,70:1781
6Twesten R D,Follstaedt D M,Choquette K D,et al.Mi-crostructure of laterally oxidized AlxGa1-xAs layers in vertical-cavity lasers.Appl Phys Lett,1996,69(1):19
8Nickel H.A detailed experimental study of the wet oxidation kinetics of AlxGa1-xAs layers.J Appl Phys,1995,78(8):5201
9Koley B,Dagenais M,Jin R,et al.Dependence of lateral oxidation rate on thickness of AlAs layer of interest as a current aperture in vertical-cavity surface-emitting laser structures.J Appl Phy,1998,84(1):600
10Hatori N,Mukaihara T,Abe M,et al.Characterization ofresidual stress in active region due to AlAs native oxide of vertical-cavity surface-emitting lasers.Jpn J Appl Phys,1996,35:6108