期刊文献+

ATPU/环氧树脂固化物热稳定性的研究 被引量:2

Research on the Curing Reaction Heat Resistance of ATPU/Epoxy Resin System
下载PDF
导出
摘要 采用热重法(TG-DTG)研究了2种含有柔性链和刚性结构单元的端胺基聚氨酯(ATPU-2和ATPU-1.5)对环氧树脂E-44固化物热稳定性特点和热分解动力学的影响。结果表明,固化剂ATPU-2与E-44固化物的热分解温度高于ATPU-1.5/E-44体系的固化物,ATPU-2/E-44固化物的分解残余量也高于ATPU-1.5/E-44体系。表明ATPU-2/E-44体系具有更好的热稳定性。固化反应动力学研究表明ATPU-2/E-44固化物的分解反应活化能高于ATPU-1.5/E-44体系。 Thermogravimetry (TG-DTA) was used to study the heat resistance characteristics and curing heat decomposition kinetics of ATPU/Epoxy Resin System. Results showed that the decomposition temperature of the cured ATPU-2/E-44 was higher than that of ATPU-1. 5/E-44 . The calculation results of decomposition reaction showed that the cured system of ATPU- 2/E-44 had better heat resistance, the reaction decomposition active energy of ATPU-2/E-44 system was higher than that of ATPU-1.5/E-44.
出处 《武汉理工大学学报》 EI CAS CSCD 北大核心 2007年第1期37-39,共3页 Journal of Wuhan University of Technology
基金 湖北省自然科学基金(2006ABA304)
关键词 端胺基聚氨(ATPU) 环氧树脂(E-44) 热稳定性 热分解动力学 活化能 amine-terminated polyurethane(ATPU) epoxy resin heat resistance heat decomposition kinetics active energy
  • 相关文献

参考文献4

二级参考文献15

共引文献25

同被引文献23

  • 1李文峰,梁国正.4,4′-二氨基甲酸酯-二苯基丙烷的热分解反应[J].高分子材料科学与工程,2006,22(3):171-175. 被引量:1
  • 2胡兵,曾黎明,田晓伟,胡传群.环氧树脂/蒙脱土纳米复合材料的制备及性能研究[J].武汉理工大学学报,2006,28(11):8-10. 被引量:7
  • 3穆中国,王源升.梯度互穿网络聚合物增韧环氧树脂的研究[J].武汉理工大学学报,2006,28(12):45-47. 被引量:4
  • 4Sponton M, Mercado L A, Ronda J C, et al. Preparation, Thermal Properties and Flame Retardancy of Phosphorus and Silicon-containing Epoxy Resins[J]. Polymer Degradation and Stability, 2008,93 (11) : 2025-2031.
  • 5Kissinger H E. Reaction Kinetics in Differential Thermal Analysis[J]. Analytical Chemistry, 1957,29(11) : 1702-1706.
  • 6Ozawa T. Kinetic Analysis of Derivative Curves in Thermal Analysis[J]. Journal of Thermal Analysis and Calorimetry, 1970,2(3) : 301-324.
  • 7Crane L W, Dynes P J, Kaelble D H. Analysis of Curing Kinetics in Polymer Composites[J]. Journal of Polymer Sci- ence: Polymer Letters Edition, 1973,11 (8) : 533-540.
  • 8Gupta V B, Drzal L T, Lee C Y , et al. The tempermurt dependence of some mechanical properties of a cured epoxy rcsm system[J]. Polym. Eng. Sci., 2004, 25: 812-823.
  • 9De'Nve B, Shanahan M E R. Water absorption by an epoxy resin and its effect on the mechanical properties and infra-red spectrai . Polymer, 1993, 34: 5099-5105.
  • 10Thomas R, Ding Y, He Y, et al. Miscibility, morphology, thermal, and mechanical properties of a DGEfSA based epoxy resm toughened with a liquid rubber[j ]. Polymer, 2008, 49:278 294.

引证文献2

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部