期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

基于Web-MMS车间自动化通信模型设计与评价 被引量：2

The Communication Model Design and Evaluation Based on Web-MMS for Shop Floor Automation
下载PDF
导出
摘要 在分析MMS以及Web服务技术的基础上,提出了车间控制系统的通信模型设计方法,构建了基于Web服务遵循MMS标准的车间控制系统通信模型.为了使车间控制通信系统具有实用性和可靠性等特点,进行了基于Web-MMS的通信模型的Petri网动态行为分析.在此基础上,进行了车间控制的通信原型系统的设计,并进行了通信模型的性能评价.分析结果表明,基于Web-MMS的通信模型设计方法是有效可行的. Based on descriptions of the manufacturing message specification （MMS） technology and the Web services technology, a design approach of communication models was presented for shop floor control systems. A Web services-based communication model, so-called a Web-MMS-based communication model, was built by following MMS standards. To make a shop floor control communication system have the characteristics of practicability, reliability, etc., dynamic behaviors of the Web-MMS-based communication model were analyzed with Petri nets. A prototype of shop floor control communication systems was designed. Finally, the performances of the communication model were evaluated. The results indicate that the proposed Web-MMS-based communication model is feasible and valid for shop floor automation.
作者 周炳海 何平 吴斌 王世进 奚立峰
机构地区 上海交通大学机械与动力工程学院
出处 《上海交通大学学报》 EI CAS CSCD 北大核心 2007年第1期66-70,共5页 Journal of Shanghai Jiaotong University
基金 国家自然科学基金资助项目(60574054) 新世纪优秀人才支持计划资助项目(2006) 上海市科委登山行动计划项目(06DZ11202)
关键词 车间控制 制造报文规范 WEB服务 通信系统 PETRI网 shop floor control manufacturing message specification （MMS） Web services communication system Petri nets
分类号 TP393 [自动化与计算机技术—计算机应用技术]
  • 相关文献

参考文献9

  • 1Gressier S E.Component oriented control architecture:the COCA project[J].Microprocessors and Microsystems,1999,23:95-102.
  • 2Zhou B H,Xi L F,Yu C M.DCOM and MMS-based control software architecture for automated manufacturing system[J].International Journal of Advanced Manufacturing Technology,2006,27 (9-10):951 -959.
  • 3Shang H P,Zhao Z X,Thorn R.Implementing manufacturing message specification (MMS) within collaborative virtual environments over the internet[J].International Journal of Computer Integrated Manufacturing,2003,16(2):112-27.
  • 4ISO/FDIS 9506-1,Industrial automation systemsmanufacturing message specification-Part 1:Service definition[S].2002.
  • 5ISO/FDIS 9506-2,Industrial automation systemsmanufacturing message specification-Part 2:Protocol specification[S].2002.
  • 6Zakaria M,Benslimane D,Ghedira C,et al.Views in composite Web services[J].IEEE Internet Computing,2005,9(4):79-84.
  • 7Hassapis G,Ananidou D.Modeling and verification of a class of real-time systems by the use of high level petri nets[J].Journal of Systems and Software,2003,68(2):153-165.
  • 8D'Souza K A,Khator S K.A survey of Petri net applications in modeling controls for automated manufacturing systems[J].Computers in Industry,1994,24(1):5-16.
  • 9Vitturi S.On the use of Ethernet at low level of fac tory communication systems[J].Computer Standards and Interfaces,2001,23(4):267-277.

同被引文献13

  • 1Wright P K. Principles of open architecture manufacturing [J]. Journal of Manufacturing Systems, 1995, 14(3) : 187-201.
  • 2Brennan R W, Zhang X K, Xu Y F, etal. A reconfigurable concurrent function block model and its implementation in real-time Java[J]. Integrated Computer- Aided Engineering, 2002, 9 (1) : 263-279.
  • 3Flecther M, Brennan R W, Norrie D H. Modeling and reconfiguring intelligent holonic manufacturing systems with Internet-based mobile agents [J]. Journal of Intelligent Manufacturing, 2003, 14: 7-23.
  • 4Azevedo L L, Sousa J P. A component-based approach to support order planning in a distribution manufacturing enterprise [J]. Journal of Materials Processing Technology, 2000, 107(1-3) :431-438.
  • 5Hall K H, Staron R J, Zoitl A. Challenges to industry adoption of the IEC 61499 standard on event-based function blocks[C]//5th IEEE International Conference on Industrial Informatics. Piscataway, USA: IEEE, 2007, 2: 823-828.
  • 6Wang L, Jin W, Feng H Y. Embedding machining features in function blocks for distributed process planning [J]. International Journal of Computer Integrated Manufacturing, 2006, 19(5): 443-452.
  • 7Crowe T J, Stahlman E J. A proposed structure for distributed shop floor systems [J]. International Journal of Production Research, 1995, 6(1): 31-36.
  • 8Zhou B H, Xi L F, Yu C M. DCOM and MMS-based control software architecture automated manufacturing system [J]. International Journal of Advanced Manufacturing Technology, 2006, 27(9): 951-959.
  • 9SOUNDARARAJAN K, BRENNAN R W. Design patterns for real-time distributed control system benchmarking[J]. Robotics and Compute-Integrated Manufacturing, 2008, 24 ( 5 ): 606-615.
  • 10SLOTA A, MALOPOLSKI W. Integration of simulation soft-ware arena with FMS control system[J]. International Journal of Simulation Modeling,2007,6(3):165-172.

引证文献2

二级引证文献2

上海交通大学学报
2007年 第1期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部