Undercooling and rapid solidification of Nb-Si eutectic alloys studied by long drop tube
Undercooling and rapid solidification of Nb-Si eutectic alloys studied by long drop tube
出处
《中国有色金属学会会刊：英文版》
CSCD
2006年第A02期89-92,共4页
Transactions of Nonferrous Metals Society of China
参考文献14
-
1QU Shi-yu,WANG Rong-ming,HAN Ya-fang.Microstructure of Nb/Nb5Si3 in situ composites[J].Trans Nonferrous Met Soc China,2002,12(4):691-694.
-
2曲士昱,王荣明,韩雅芳.Nb-Si系金属间化合物的研究进展[J].材料导报,2002,16(4):31-34. 被引量：27
-
3陈哲,严有为.Nb/Nb_5Si_3复合材料的研究进展[J].材料导报,2004,18(2):49-51. 被引量：5
-
4MENDIRATTA M G,DIMIDUK D M.Strength and toughness of Nb-Nb5Si3 composite[J].Metall Mater Trans A,1993,24:501-504.
-
5SPAEPEN F.Undercooled alloy phases[A].KOCH C C.Proc.1986 Hume-Rothery Memorial Symp[C].New Orleans:TMS-AIME,1986:187-193.
-
6BERTERO G A,HOFMEISTER W H,ROBINSON M B,BAYUZICK R J.Containerless processing and rapid solidification of Nb-Si alloys in the Niobium-rich eutectic range[J].Metallurgical Transactions A,1991,22:2723-2732.
-
7BERTERO G A,HOFMEISTER W H,ROBINSON M B,BAYUZICK R J.Containerless processing and rapid solidification of Nb-Si alloys of hypereutectic composition[J].Metallurgical Transactions A,1991,22:2713-2721.
-
8BENDERSKY L,BIANCANIELLO F S,BOETTINGER W J,PEREPEZKO J H.Microstructural characterization of rapidly solidified Nb-Si alloys[J].Materials Science and Engineering,1989,87:151-159.
-
9BOWDEN D M,MENDIRATTA M.Phase selection in rapidly solidified niobium-silicon alloys[J].Materials Letters,1998,7(4):146-148.
-
10GREER A L.Nucleation and solidification studies using drop-tube[J].Materials Science and Engineering A,1994,178(1-2):113-120.
二级参考文献32
-
1李志林,曲选辉,黄伯云.新型高温结构材料——金属间化合物的研究动态[J].材料导报,1995,9(3):16-19. 被引量：9
-
2Kajuch J,Short J,Lewandowski J J. Acta Metall Mater,1995,43(5):1955
-
3Zhang L T,Wu J S. Scripta Mater,1998,38(2):307
-
4Anton D L, Shan D M. Report WRDC-TR-90-4122,WRDC/MLLM, Wright-Patterson AFB, Dayton, OH,1990
-
5Fleischer R L, Field R D. Report WRDC TR-90 4046,WRDC/MLLM, Wright-Patterson AFB, Dayton, OH,1990
-
6Vasudevan A K, Petrovic J J. Mater Sci Eng A, 1992,A155:1
-
7Meyer M,et al. Adv Mater,1996,8(1):85
-
8Mendiratta M G,Lewandowski J J,Dimduk D M. Metall Trans A,1991,22A:1573
-
9Frommeyer G,et al. Z Metallkde,1990,81:307
-
10Meschter P J,et al. JOM,1989,(11):52
共引文献29
-
1肖来荣,易丹青,殷磊,蔡志刚.Morphology and structure of high temperature MoSi_2 coating on niobium[J].中国有色金属学会会刊：英文版,2005,15(1):18-22. 被引量：2
-
2宋立国,曲士昱,宋尽霞,李树索,宫声凯,韩雅芳.1250℃热处理对Nb-16Si-24Ti-6Cr-6Al-2Hf合金的组织影响[J].材料工程,2005,33(12):30-32. 被引量：9
-
3伍春兰,周兰章,郭建亭.Ta含量对Nb-Nb_5Si_3共晶合金的组织和压缩性能的影响[J].金属学报,2006,42(10):1061-1064. 被引量：3
-
4姜荣丽,刘东明,沙江波,马岳.High-temperature oxidation behavior of Nb_(67-x)W_(15)Si_(18)Hf_x(x=0, 5 and 10) alloys[J].中国有色金属学会会刊：英文版,2006,16(A03):2009-2012. 被引量：1
-
5宋立国,曲士昱,宋尽霞,李树索,宫声凯,韩雅芳.一种多元铌硅系原位复合材料的高温氧化行为[J].航空学报,2007,28(1):201-206. 被引量：3
-
6肖璇,鲁世强,胡平,黄铭刚,李鑫.超细晶Laves相NbCr2颗粒增强Nb基复合材料的制备及其组织性能研究[J].航空材料学报,2008,28(3):44-48. 被引量：3
-
7钟文丽,白书欣,张虹.烧结气氛对Nb+PCS烧结体制备的影响[J].金属热处理,2008,33(8):116-119.
-
8何永胜,郭喜平,孙志平,巨小创.铌硅化物基超高温合金电弧熔炼态组织和成分分布[J].材料工程,2009,37(1):4-9. 被引量：2
-
9朱鹏超,李双明,郑元斌,傅恒志.定向凝固恒速和跃迁加速下Cu-12.58%Mg过共晶合金的凝固组织演变[J].铸造,2009,58(6):543-545. 被引量：2
-
10王东辉,郑欣,李中奎,张廷杰,白润,夏明星,付洁.Nb-W-Mo-Zr-C高温合金的时效强化[J].稀有金属材料与工程,2008,37(A04):618-621. 被引量：10
-
1Li Na,Sha Minghong,Xu Qian,Zhang Shuang,Li Shengli.Rapid solidification of steel droplets with different carbon contents in drop tube[J].China Foundry,2012,9(1):20-23. 被引量：1
-
2Liling SUN,Qi WU,Liwei SUN and Wenkui WANG (Institute of Physics, Chinese Academy of Sciences, Beijing 100080, China).Microstructure of Pd_(77.5)Au_6Si_(16.5) Alloy Droplet Solidified in a Drop Tube Process[J].Journal of Materials Science & Technology,1996,12(5):385-388.
-
3WANGHaipeng CAOChongde WeiBingbo.Rapid monotecticsolidincation during free fall in a drop tube[J].Chinese Science Bulletin,2004,49(3):220-224. 被引量：6
-
4LIU Xiangrong, CAO Chongde and WEI Bingbo(Department of Applied Physics, Northwestern Polytechnical University, Xi’an 710072, China).Rapid dendritic growth of A1-Ge hypoeutectic alloy in a drop tube[J].Progress in Natural Science:Materials International,2003,13(2):157-160.
-
5佘喜旺,王学文,王戈岩.农用挂车轮轴焊合的焊接裂纹研究[J].当代农机,1995,0(S1):77-78.
-
6Wang, N., Wei, B..RAPID SOLIDIFICATION OF HYPEREUTECTIC SILVER-COPPERALLOY IN DROP TUBE[J].Acta Metallurgica Sinica(English Letters),1999,12(3):251-258.
-
7王执福,郭锋,于化顺,曹崇德,魏炳波.Rapid solidification of Al-18%Si hypereutectic alloy in drop tube[J].中国有色金属学会会刊：英文版,2000,10(6):769-771.
-
8刘礼,马晓丽,赵素.Microstructure and Hardness of Ni-rrSi Alloys[J].Journal of Shanghai Jiaotong university(Science),2012,17(6):648-652. 被引量：2
-
9魏正英,唐一平,卢秉恒.节水滴管模具的快速制造方法研究[J].模具工业,2001,27(5):41-44. 被引量：3
-
10朱昌盛,王智平,荆涛,柳百成.Phase-field simulation of dendritic sidebranching induced by thermal noise[J].中国有色金属学会会刊：英文版,2004,14(6):1106-1110.
