Continuous and directional solidification technology of titanium alloys with cold crucible 被引量：4

Continuous and directional solidification technology of titanium alloys with cold crucible

下载PDF

导出

作者陈瑞润丁宏升郭景杰毕维生傅恒志

机构地区 School of Materials Science and Engineering

出处《中国有色金属学会会刊：英文版》 CSCD 2006年第A02期154-159,共6页 Transactions of Nonferrous Metals Society of China

基金 Acknowledgements This work was supported by the National Key Fundamental Research Development Program of China （G200067202-2） and by Natural Science Foundation of China （50395102）.

关键词钛合金连续凝固工艺直接凝固工艺冷坩锅定向凝固 Ti6A14V alloys cold crucible continuous casting directional solidification

分类号 TG146.23 [金属学及工艺—金属材料]

引文网络
相关文献

参考文献8

1蒋炳玉.冷坩埚真空感应熔炼[J].稀有金属材料与工程,1999,28(2):105-109. 被引量：10
2苏彦庆,郭景杰,贾均,丁宏升.真空熔炼TiAl金属间化合物过程中合金元素的挥发行为[J].铸造,1999,48(3):1-4. 被引量：9
3邓康,任忠鸣,蒋国昌.软接触电磁连铸的数值模拟和实验分析[J].金属学报,1999,35(10):1112-1116. 被引量：15
4郭景杰,王同敏,苏彦庆,丁宏升,贾均.钛的水冷铜坩埚感应熔炼温度场数值模拟[J].铸造,1997,46(9):1-4. 被引量：6
5邓安元,于光伟,贾光霖,赫冀成.软接触电磁结晶器内三维弯月面形状数值模拟[J].钢铁研究学报,2001,13(3):10-14. 被引量：16
6丁宏升,郭景杰,贾均,苏彦庆.真空感应凝壳熔炼TC4合金的显微组织和力学性能[J].材料科学与工艺,1999,7(S1):12-16. 被引量：10
7侯晓光,张兴国,曹志强,金俊泽.钢电磁铸造复合感应器系统研究[J].大连理工大学学报,2000,40(4):447-450. 被引量：3
8金俊泽,张兴国,曹志强,朱晓鹰.铝合金电磁铸造工艺参数的研究[J].材料研究学报,1996,10(4):397-400. 被引量：3

二级参考文献35

1蒋炳玉.冷坩埚感应熔炼活性金属的发展与应用[J].稀有金属材料与工程,1993,22(2):1-6. 被引量：19
2熊翔,黄伯云.熔铸TiAl合金热等静压处理的研究[J].中国有色金属学报,1995,5(3):82-84. 被引量：8
3方正湖李培芳.工程电磁学[M].杭州:浙江大学出版社,1989..
4孙振宇.钢电磁铸造成型系统的研究[M].大连:大连理工大学,1996..
5冯慈章.电磁场[M].北京:高等教育出版社,1986.302.
6雷洪.连铸结晶器内电磁制动及水口吹氩过程的模拟仿真研究.东北大学学位论文[M].沈阳,1998..
7牛丽萍.电磁连铸软接触结晶器热态模拟试验研究.东北大学学位论文[M].沈阳,2000..
8颜鸣皋曹春晓.Ti-Al系金属间化合物材料的进展.第七届全国钛合金学术交流会论文集[M].长沙:中南工业大学出版社,1991.201-205.
9孙洪志吴爱珍.国外钛及钛合金研究与工艺开发的进展[J].稀有金属材料与工程,1988,17(5):47-54.
10O.库巴谢夫斯基等邱竹贤等（译）.冶金热化学[M].北京:冶金工业出版社,1985..

共引文献60

1王家淳,王同敏,薛冠霞,郭世杰,曹志强,李廷举.软接触电磁连铸硬铝合金圆坯结晶器透磁性能模拟[J].特种铸造及有色合金,2008(S1):527-530.
2胡慧.基于ANSYS的感应炉硅提纯数值模拟[J].自动化与仪器仪表,2016(3):216-218.
3宋长江,梁高飞,许振明,卢百平,沈军,李建国.1Cr18Ni9Ti不锈钢的双频电磁约束成形工艺参数优化[J].上海交通大学学报,2004,38(9):1476-1480. 被引量：1
4王辉,金俊泽,李廷举.电磁铸造电磁作用力的数学分析及试验研究[J].稀有金属材料与工程,2004,33(11):1149-1152. 被引量：2
5郭世柏,曲选辉,何新波,段柏华.Mechanical properties and microstructure of Ti-6Al-4V compacts by metal injection molding[J].中国有色金属学会会刊：英文版,2004,14(6):1055-1061.
6陈瑞润,丁宏升,毕维生,郭景杰,贾均,傅恒志.电磁冷坩埚技术及其应用[J].稀有金属材料与工程,2005,34(4):510-514. 被引量：27
7陈瑞润,丁宏升,毕维生,郭景杰,贾均,傅恒志.钛合金冷坩埚电磁约束铸造工艺研究[J].特种铸造及有色合金,2005,25(6):323-325. 被引量：12
8金百刚,王强,邓安元,王恩刚,张林涛,王道海,李振国,赫冀成.两段式方坯结晶器内电磁场分布及弯月面行为[J].铸造,2005,54(6):556-559. 被引量：3
9郭世柏,曲选辉,段柏华,何新波,秦明礼.注射成形Ti-6Al-4V合金的显微组织和力学性能[J].北京科技大学学报,2005,27(3):307-311. 被引量：2
10那贤昭,王锡钢,张兴中,干勇.软接触电磁连铸过程中结晶器及初生坯壳的传热[J].钢铁研究学报,2005,17(5):31-34. 被引量：4

同被引文献15

1沈伯奎.铸造铝镍钴磁钢的定向凝固[J].特种铸造及有色合金,2004,24(4):28-30. 被引量：3
2苏彦庆,李新中,郭景杰,吴士平,丁宏生,傅恒志.Phase and microstructure selection in directionally solidified peritectic alloys with convection[J].中国有色金属学会会刊：英文版,2006,16(A02):53-58. 被引量：1
3丁雨田,张雪娟,许广济,胡勇,寇生中.合金定向凝固相场模型数值模拟的发展[J].铸造,2007,56(3):226-230. 被引量：2
4王红,张军,崔春娟,刘林,傅恒志.难熔金属单晶的电子束悬浮区熔定向凝固[J].材料工程,2008,36(2):71-75. 被引量：12
5傅恒志,丁宏升,陈瑞润,毕维生,王艳丽,白云峰,徐达鸣,苏彦庆,郭景杰.钛铝合金电磁冷坩埚定向凝固技术的研究[J].稀有金属材料与工程,2008,37(4):565-570. 被引量：18
6Deng, Kang, Zhou, Yueming, Ren, Zhongming, Gong, Tao, Jiang, Guochang.ELECTROMAGNETIC CHARACTERISTICS OF LEVITATION MELTING WITH COLD CRUCIBLE[J].中国有色金属学会会刊：英文版,1999,9(2):183-188. 被引量：2
7胡小武,李双明,高思峰,刘林,傅恒志.Effect of melt convection on primary dendrite arm spacing in directionally solidified Pb-26%Bi hypo-peritectic alloys[J].Transactions of Nonferrous Metals Society of China,2011,21(1):65-71. 被引量：4
8汤孟欧,徐骏,张志峰,白月龙.Effects of annulus gap on flow and temperature field in electromagnetic direct chill casting process[J].Transactions of Nonferrous Metals Society of China,2011,21(5):1123-1129. 被引量：5
9陆永浩,张永刚,乔利杰,王燕斌,陈昌麒,褚武扬.In-situ crack propagation observation in fully lamellar Ti-49%Al alloy[J].中国有色金属学会会刊：英文版,2000,10(5):599-602. 被引量：1
10张海涛,崔建忠.Production of super-high strength aluminum alloy billets by low frequency electromagnetic casting[J].Transactions of Nonferrous Metals Society of China,2011,21(10):2134-2139. 被引量：6

引证文献4

1杨治立,陈登明,廖道瀚.铝镍钴定向凝固过程的模拟研究[J].材料工程,2009,37(1):46-49. 被引量：2
2Yang Zhili,Chen Dengming,Tian Shilong,Liao Daohan,Yang Yu.Numerical simulation on directional solidification of Al-Ni-Co alloy based on FEM[J].China Foundry,2010,7(1):57-60. 被引量：1
3YANG Jie-ren,CHEN Rui-run,DING Hong-sheng,SU Yan-qing,HUANG Feng,GUO Jing-jie,FU Heng-zhi.Numerical calculation of flow field inside TiAl melt during rectangular cold crucible directional solidification[J].Transactions of Nonferrous Metals Society of China,2012,22(1):157-163. 被引量：6
4陈瑞润,杨劼人,丁宏升,黄锋,苏彦庆,郭景杰,傅恒志.Effect of configuration on magnetic field in cold crucible using for continuous melting and directional solidification[J].Transactions of Nonferrous Metals Society of China,2012,22(2):404-410. 被引量：3

二级引证文献10

1黄婉如,廖恒成,吴申庆,孙国雄.单向凝固中温度梯度和凝固速度对铝硅合金共晶生长形态的影响[J].铸造,2010,59(3):239-242. 被引量：4
2汪洋,山本树一.热处理对Al-Ni-Co单准晶相的影响[J].材料热处理学报,2011,32(4):13-16. 被引量：1
3王书杰,王亮,骆良顺,苏彦庆,董福宇,郭景杰,傅恒志.Stability of remelting and solidification interfaces of triple-phase region during peritectic reaction at lower speed[J].Transactions of Nonferrous Metals Society of China,2014,24(6):1951-1958. 被引量：1
4赵堃,刘咏,黄岚,刘彬,李建波,梁霄鹏,贺跃辉.热变形粉末冶金Ti-45Al-7Nb-0.3W合金热处理过程的组织演变[J].中国有色金属学报,2014,24(10):2506-2512. 被引量：2
5付彬国,王宏伟,邹鹑鸣,马盼,魏尊杰.Interfacial reactions between Ti-1100 alloy and CaO crucible during casting process[J].Transactions of Nonferrous Metals Society of China,2014,24(10):3118-3125. 被引量：5
6王均鹏,马文会,朱奎松,刑爱民,吕国强.过共晶Ti-Si合金熔体电磁定向凝固过程实验和数值模拟[J].昆明理工大学学报（自然科学版）,2021,46(4):1-10.
7李泽宇,刘国怀,王晔,王昭东.悬浮熔炼下电源参数和冷坩埚结构对铝钪合金熔体的影响[J].热加工工艺,2024,53(1):115-121.
8田智睿,付维达,郝龙,张小新,蒋丹青,胡涛,陈超越,余建波,谭毅,任忠鸣,无.静磁场下电子束运动行为仿真[J].中国有色金属学报,2024,34(7):2343-2355.
9DING Hong-sheng,FENG Kui,WANG Yong-zhe,CHEN Rui-run,GUO Jing-jie.Preparation and Microstructure Evaluation of Directionally Solidified Nd-Fe-B Ingots by Electromagnetic Cold Crucible[J].Journal of Iron and Steel Research International,2012,19(S1):237-242.
10彭岚,龚欢.Effects of static magnetic fields on melt flow in detached solidification[J].Transactions of Nonferrous Metals Society of China,2015,25(3):936-943. 被引量：3

1Huang Feng,Chen Ruirun,Guo Jingjie,Ding Hongsheng,Su Yanqing,Yang Jieren,Fu Hengzhi.Continuous melting and directional solidification of silicon ingot with an electromagnetic cold crucible[J].China Foundry,2012,9(1):24-27. 被引量：1
2CHEN Rui-run,DING Hong-sheng,GUO Jing-jie,BI Wei-sheng,FU Heng-zhi.Process on cold crucible electromagnetic casting for titanium alloy[J].China Foundry,2007,4(3):190-193. 被引量：3
3Chen Ruirun,Huang Feng,Guo Jingjie,Ding Hongsheng,Yang Jieren,Fu Hengzhi.Electromagnetic characteristics of square cold crucible designed for silicon preparation[J].China Foundry,2011,8(2):207-211. 被引量：3
4Deng, Kang, Zhou, Yueming, Ren, Zhongming, Gong, Tao, Jiang, Guochang.ELECTROMAGNETIC CHARACTERISTICS OF LEVITATION MELTING WITH COLD CRUCIBLE[J].中国有色金属学会会刊：英文版,1999,9(2):183-188. 被引量：2
5Chen Ruirun,Yang Jieren,Ding Hongsheng,Huang Feng,Su Yanqing,Guo Jingjie,Fu Hengzhi.Effect of power parameter and induction coil on magnetic field in cold crucible during continuous melting and directional solidification[J].China Foundry,2012,9(1):15-19. 被引量：2
6丁宏升,王艳丽,郭景杰,贾均,傅恒志.Electromagnetic characteristics of cold crucible in an induction coil for melting purpose[J].Journal of Harbin Institute of Technology(New Series),2006,13(2):141-145. 被引量：2
7Qiang HUANG,Xi-ping GUO,Yong-wang KANG,Jin-xia SONG,Shi-yu QU,Ya-fang HAN.Microstructures and mechanical properties of directionally solidified multi-element Nb-Si alloy[J].Progress in Natural Science:Materials International,2011,21(2):146-152. 被引量：8
8黄文梅(摘译).先进的金属凝固技术开发[J].现代材料动态,2013(6):8-8.
9Deng Kang,Zhou Yueming,Ren Zhongming,Zhu Shoujun,Wei Jihe,Jiang Guochang(Shanghai Enhanced Laboratory of Ferrometallurgy,Shanghai University, Shanghai 200072).ELECTROMAGNETIC MODEL OF LEVITATION MELTING WITH COLD CRUCIBLE[J].中国有色金属学会会刊：英文版,1996,6(2):12-17. 被引量：3
10WANG Yan-li,DING Hong-sheng,GUO Jing-jie,BI Wei-sheng,XU Da-ming,FU Heng-zhi.Effects of processing parameters on the surface quality of directionally solidified tita-nium alloy slab with cold crucible[J].China Foundry,2006,3(1):30-35.

中国有色金属学会会刊：英文版

2006年第A02期

浏览历史

内容加载中请稍等...