3D finite element method analysis of deformation and temperature rise during equal-channel angular pressing
3D finite element method analysis of deformation and temperature rise during equal-channel angular pressing
出处
《中国有色金属学会会刊：英文版》
CSCD
2006年第A02期219-224,共6页
Transactions of Nonferrous Metals Society of China
关键词
等通道转角挤压
压制荷载
变形
温升
温度分布
物料流
三维有限元法
finite element method
equal-channel angular pressing
material flow
pressing load
temperature distribution
参考文献22
-
1MUGHRABI H,HEPPEL H W,KAUTZ M.Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation[J].Scripta Mater,2004,51:807-812.
-
2IWAHASHI Y,HORITA Z,NEMOTO M,et al.The process of grain refinement in equal-channel angular pressing[J].Acta Materialia,1998,46:3317-3331.
-
3CHANG S Y,LEEB K S,CHOIC S H,et al.Effect of ECAP on microstructure and mechanical properties of a commercial 6061 Al alloy produced by powder metallurgy[J].Journal of Alloys and Compounds,2003,354:216-220.
-
4SKRIPNYUK V M,RABKIN E,ESTRIN Y,et al.The effect of ball milling and equal channel angular pressing on the hydrogen absorption/desorption properties of Mg-4.95 wt% Zn-0.71 wt% Zr (ZK60) alloy[J].Acta Materialia,2004,52:405-414.
-
5SEMENOVA I P,RAAB G I,SAITOVA L R,et al.The effect of equal-channel angular pressing on the structure and mechanical behavior of Ti-6Al-4V alloy[J].Mater Sci Eng A,2004,387-389:805-808.
-
6STOLYAROV V V,LAPOVOK R,BRODOVA I G,et al.Fine-grained Al-5wt.%Fe alloy processed by ECAP with back-pressure[J].Mater Sci Eng A,2003,357:159-167.
-
7XU C,FURUKAWA M,HORITA Z,et al.Severe plastic deformation as a processing tool for developing superplastic metals[J].Journal of Alloys and Compounds,2004,378:27-34.
-
8WANG Y M,MA E.Three strategies to achieve uniform tensile deformation in a nanostructured metal[J].Acta Materialia,2004,52:1699-1709.
-
9PARK K T,KIM Y S,LEE J G,et al.Thermal stability and mechanical properties of ultrafine grained low carbon steel[J].Mater Sci Eng A,2000,293:165-172.
-
10MOON B S,KIM H S,HONG S I.Plastic flow and deformation homogeneity of 6061 Al during equal channel angular pressing[J].Scripta Mater,2002,46:131-136.
-
1周杰,李晶,孟毅.基于CAD/CAE技术的汽车曲轴模锻工艺优化[J].锻压装备与制造技术,2007,42(4):46-48. 被引量：4
-
2盖超,陈伟,吕彦明.DEFORM-3D软件在叶片锻坯结构形式选取中的应用[J].热加工工艺,2007,36(1):74-76. 被引量：7
-
3黄东男,李静媛,谢建新.模具结构对AZ91镁合金挤压成形性能的影响[J].塑性工程学报,2009,16(4):105-110. 被引量：8
-
4刘红艳,李海峰,徐致让.PC轧机辊系的三维建模与有限元分析[J].安徽工业大学学报（自然科学版）,2007,24(2):177-180. 被引量：3
-
5楼文高,喻怀仁.三维有限元法在麻花钻结构分析中的应用[J].上海工业大学学报,1991,12(3):233-239.
-
6许晓静,曹进琪,程晓农,莫纪平.Tensile properties of 2024 Al alloy processed by enhanced solid-solution and equal-channel angular pressing[J].中国有色金属学会会刊：英文版,2006,16(A03):1541-1544. 被引量：3
-
7Fu-Yuan Dong,Peng Zhang,Jian-Chao Pang,Qi-Qiang Duan,Yi-Bin Ren,Ke Yang,Zhe-Feng Zhang.Microstructure and Mechanical Properties of High-Nitrogen Austenitic Stainless Steels Subjected to Equal-Channel Angular Pressing[J].Acta Metallurgica Sinica(English Letters),2016,29(2):140-149. 被引量：5
-
8Jiatao zhang, jialin Sun, Jinming Long, Shuixing Tang Kunming University of Science and Technology, Kunming , 650093, China.Computer Simulation on Temperature Rise in Process of Wire Drawing[J].Journal of Shanghai Jiaotong university(Science),2000,5(1):242-247.
-
9许思广,曹起骧,连家创.异形截面环件轧制过程的三维有限元分析[J].锻压机械,1994,29(3):8-11. 被引量：6
-
10权国政,王梦寒,周杰.铝合金管材冷空拔成形模拟研究[J].锻压装备与制造技术,2005,40(1):74-76. 被引量：3
