1HOU H.Studies on Numerical Simulation for Liquid-metal Filling and Solidification During Casting Process[D].Japan:Saitama Institute of Technology,2005
2HOU H,JU D Y,ZHAO Y H,CHENG J.Numerical simulationfor dendrite growth of binary alloy with phase-field method[J].J Mater Sci Technology,2004,20(12):45-48.
4YOU B K.Temperature Measurement and Instrument:Couple and Thermal Resistance[M].Document Press of Science and Technology,1990.
5COMPBELL J.Invisible macrodefects on castings[J].Journal De Physique iv,1993(3):861-872.
6JU D Y,INOUE T.Simulation of solidification and heat flow in strip casting process by twin roll method[A].Proceeding of Conference on Computer-assisted Design and Process Simulation[C].Tokyo,1993.84-98.
7JU D Y,INOUE T.Analysis of heat fluid flow incorporating solidification and its application to thin slab continuous casting process[J].Transaction of the Japan Society of Mechanical Engineering (JSME),1993,59(565):2189-2195.
8KAPRANOS P,BARKHUDAROV M R,KIRKWOOD D H.Modeling of structural breakdown during rapid compression of semi-solid alloy slugs[A].5th International Conference on Semi-solid Processing of Alloys and Composites[C].Golden,1998.23-25.
9HOU HUA.Studies on Numerical Simulation for Liquid-metal Filling and Solidification During Casting Process[D].Japan:Saitama Institute of Technology,2005.
10WESTER J.Delft University of Technology[D].Delft,Netherlands:Delft University of Technology,1993.
9HAO Jing, CHEN Li-liang, ZHOU Jian-xin, LIAO Dun-ming (State Key Laboratory of Material Processing and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China).Liquid-Gas Two-Phase Flow Simulation in Mold Filling Process with Level Set Method[J].Computer Aided Drafting,Design and Manufacturing,2008,18(1):66-72.