期刊文献+

板料成形中韧性断裂准则应用研究进展 被引量:12

Recent advances of research on application of ductile fracture criteria in sheet metal forming process
下载PDF
导出
摘要 对板料成形中的成形极限应力图、最大变薄率、成形极限图以及韧性断裂准则等预测成形极限的方法,进行了综述和分析.指出利用韧性断裂准则,不但能够较好地预测塑性差的板料成形极限,而且还能考虑应变路径的变化.利用有限元方法模拟时,韧性断裂准则既可以应用到完全耦合的弹塑性损伤模型的增量方法中,也可以应用到一步有限元逆算法中.为了准确地预测成形极限,除了提高有限元模拟精度外,应找到一种本质地反映材料性能的韧性断裂准则. This paper overviewed the prediction methods of forming limit in sheet metal forming, which included forming limit stress diagram, the maximum forming thinning ratio, forming limit diagram and ductile fracture criteria(DFC). Then this paper pointed out that DFC could predict the forming limit of metal sheet with low plasticity well and meantime take the change of forming path into account. When adopting FEA to model, DFC could not only apply into incremental approach with a fully coupled elastic and plastic damage model, but to one step inverse approach. To accurately predict forming limit, a criterion to reflect material performance in essence was indispensable besides increasing the FEA model accuracy.
出处 《工程设计学报》 CSCD 北大核心 2007年第1期6-10,20,共6页 Chinese Journal of Engineering Design
基金 国家自然科学基金资助项目(50475020)
关键词 韧性断裂准则 板料成形 成形极限 有限元法 ductile fracture criteria sheet metal forming forming limit finite element method
  • 相关文献

参考文献22

  • 1胡平,柳玉起,李运兴.板材成形缺陷及其数值仿真[J].应用基础与工程科学学报,1999,7(1):45-60. 被引量:13
  • 2叶又,彭颖红,阮雪榆.板料成形数值模拟的关键技术及难点[J].塑性工程学报,1997,4(2):19-23. 被引量:21
  • 3ARRIEUX R.Determination and use of the forming limit stress diagrams in sheet metal forming[J].Journal of Materials Processing Technology,1995,53(1/2):47-56.
  • 4HUANG Y M,CHIEN K H.The formability limitation of the hole-flanging process[J].Journal of Materials Processing Technology,2001,117(1/2):43-51.
  • 5万敏,周贤宾.复杂加载路径下板料屈服强化与成形极限的研究进展[J].塑性工程学报,2000,7(2):35-39. 被引量:38
  • 6TAKUDA H,MORI K,HATTA N.Application of some criteria for ductile fracture to the prediction of the forming limit of sheet metals[J].Journal of Materials Processing Technology,1999,95(1/3):116-121.
  • 7TAKUDA H,MORI K,FUJIMOTO H,et al.Prediction of forming limit in bore-expanding of sheet metals using ductile fracture criterion[J].Journal of Materials Processing Technology,1999,92/93(8):433-438.
  • 8JAIN M,ALLIN J,LLOYD D J.Fracture limit prediction using ductile fracture criteria for forming of an automotive aluminum sheet[J].International Journal of Mechanical Sciences,1999,41(10):1273-1288.
  • 9嵇国金,彭颖红,阮雪榆.有关金属体积成形中的韧性断裂准则[J].金属成形工艺,1998,16(4):36-37. 被引量:7
  • 10LEMAITRE J.A continuous damage mechanics model for ductile fracture[J].Journal of Engineering Materials and Technology,1985,107(1):83-89.

二级参考文献19

  • 1吴诗悖.冲压工艺学[M].西安:西北工业大学出版社,1990.147—284.
  • 2Swift H W. Plastic instability under plane stress[J].Journal of Mechanics and Physics of Solids, 1952, 1:1-18.
  • 3Hill R. On discontinuous plastic states with special reference to localized necking in thin sheets[J]. Journal of Mechanics and Physics of Solids, 1952, 1:19 -30.
  • 4Marciniak Z, Kuczynski K. Limit strains in the processes of stretch-forming sheet metal[J]. International Journal of Mechanical Sciences, 1967, 9:609 -620.
  • 5Storen S, Rice J R. Located necking in thin sheets[J]. Journal of Mechanics and Physics of Solids,1975, 23:421-441.
  • 6Takuda H, Mori K. Prediction of forming limit in deep drawing of Fe/Al laminated composite sheet using ductile fracture criterion[J]. Journal of Material Processing Technology, 1996, 60 : 291 - 296.
  • 7Takuda H, Mori K. Prediction of forming limit in bore-expending of sheet metals using ductile fracture criterion[J]. Journal of Material Processing Technology, 1999, 92 - 93:433 -438.
  • 8Jain M, Allin J. Fracture limit prediction using ductile fracture criterion for forming of an automotive aluminum sheet[J]. International Journal of Mechanical Sciences, 1999, 41 : 1273 - 1288.
  • 9Lei L P, Kang B $. Prediction of the forming limit in hydroforming processes using the finite element method and a ductile fracture criterion[J]. Journal of Material Processing Technology, 2001, 113:673 - 679.
  • 10Tang C Y, Chow C L. Development of a damage-based criterion for ductile fracture predictive in sheet metalforming[J]. Journal of Material Processing Technology, 1999, 91: 270-277.

共引文献177

同被引文献105

引证文献12

二级引证文献77

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部