摘要
一次设备的防误操作已经有了很多措施和经验,那么二次压板如何防止误操作呢?选取两个压板操作的实际案例对二次压板操作的安全措施与防范探讨进行分析,一为没有正确测量出压板两端有电压却错误放上,导致瓦斯保护触点通过压板接通跳闸线圈将开关跳闸;二为测量微机保护功能压板有电压就认为有问题,不敢进行将压板压上的操作,延误了整个操作任务的完成。最后提出二次压板操作哪些情况应该测电压、二次压板操作的注意事项等,推荐用高内阻电压表测量电压。
Lots of methods and experiences are obtained for preventing misoperation of primary equipment, then how to advoid maloperation?The paper discusses the security and prevention of the operation of secondary pressure plate via the analysis on two actual operations. One is switch tripping caused by the trip coil being connected with gas protection contact via pressure plate when mistakenly pressing the pressure plate after the measurement of zero voltage on the two sides of the pressure plate; The other is total operation deferring due to the non-operation of pressure plate for the problem thought to be existed after the measurement of voltage on the microcomputer protection function pressure plate. It finally puts forward the conditions under which voltage shall be measured regarding the operation of the secondary pressure plate, points for attention out the operation of secondary pressure plate, and recommends the use of high-resistance multi meter.
出处
《继电器》
CSCD
北大核心
2007年第2期76-78,共3页
Relay
关键词
二次压板
测量电压
操作
措施
防范
secondary pressure plate
measure voltage
operation method
measurement
prevention