期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

玻璃熔制效率的关键及熔窑大幅节能的方向 被引量：4

Key to Glass Melt Efficiency And Energy Saving Direction of Glass Furnace
下载PDF
导出
摘要 从熔制玻璃的工艺和熔窑运行的基本原理出发,研究玻璃熔制过程对能量的需求和熔窑结构对散热能耗的工艺需求,探讨影响玻璃熔制效率的关键因素,阐述了大幅节能降耗工艺变革方向的依据。 The energy requirement for glass melt process and the heat dissipation technological requirement for furnace structure were investigated on the basis of principle of glass melt technology and furnace running . The key factors affecting glass melt efficiency and the theoretical basis of energy saving and consumption reduction direction were also discussed.
作者 杨志强 杨宏 吴亚丽 茅力佐
机构地区 同济大学材料科学与工程学院 江苏华尔润集团有限公司
出处 《玻璃》 2007年第1期14-20,共7页 Glass
关键词 玻璃熔制 能耗 效率 节能 glass melt , energy consumption , efficiency , energy saving
分类号 TQ171 [化学工程—玻璃工业]
  • 相关文献

参考文献4

  • 1Ruud Beerkens: future industrial glass melting concepts, proceedings of international congress on glass,v. 1 , pp180--192, July 2001.
  • 2Michael Cable, A Century of Developments in Glassmelting Research, J. Am. Ceram. Soc., 81[5]1083- 1094 (1998)
  • 3Ito, T. Hosoi, M. Suganuma, and T. Uno, "On Melting Progress of Flat Glass Batch Layer Fed on Surface of Molten Glass -- Measurement of Temperature Change within the Batch Layer and Observation of Its Melting Progress," Res. Rep. Asahi Glass Co. , 4 [2] 98 - 106(1954) .
  • 4Zhiqiang Yang, Zhihao Zhou. (1997) . Basic flow pattern and its variation on different types of glass tanks ,.Ber. Glass Sci. Technol. 70 (1997)no. 6 p. 165--172

同被引文献29

  • 1刘晓勇,刘贵海,王永纯.利用窑炉烟气余热预热玻璃配合料[J].玻璃,2004,31(6):14-16. 被引量：3
  • 2Kjlseth Christian,Wang lin-Yung,Hauqsrud Reidar,et al.Determination of the enthalpy of hydration of oxygen vacanciesin Y-doped BaZrO3and BaCeO3by TG-DSC[J].Solid StateIonics,2010,181~39,40):1740~1745.
  • 3Bylina I.,Trevani L.,Mojumdar S.C.,et al.Measurement ofreaction enthalpy during pressure oxidation of sulphide minerals[J].Journal of Thermal Analysis and Calorimetry,2009,96(1):117~124.
  • 4V.A.Drebushchak.Calibration coefficient of a heat-flow DSC[J].Journal of themal analysis and calorimetry,2004,76:941~947.
  • 5Mchugh J.,Fideu P.Herrmann A.,Stark W.Determinationand review of specific heat capacity measurements duringisothermal cure of an epoxy using TM-DSC and standard DSCtechniques[J].Polymer Testing,2010,29(6):759~765.
  • 6R.Androsch,I.Moon,S.Kreitmeier,et al.Determination ofHeat capacity with a Sawtooth-type,Power-compensatedtemperature-modulated DSC[J].Thermochimica Acta,2000,357:267~278.
  • 7高秀文,徐辉,韩敦信.GJB 330A-2000固体材料60~2773K比热容测试方法[S].北京:国防科学技术工业委员会,2000.
  • 8Yasutoshi Saito,Kazuya Saito,Tooru Atake.Base line drawingfor the determination of the enthalpy of transition in classicalDTA,power-compensated DSC and heat-flux DSC[J].Thermochimica Acta,1986,104:275~283.
  • 9Bayram J,Kaya L,Orhan B.Developments in glass meltingfurnace design energy and environmental management[J].Advanced Materials Research,2008,39(40):405~412.
  • 10E.Worrell,C.Galitsky,et al.Energy Efficiency Improvementand Cost Saving Opportunities for the Glass Industry[M].California:U.S.Environmental Protection Agency,2008,94~720.

引证文献4

二级引证文献7

玻璃
2007年 第1期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部