期刊文献+

过共晶铝硅合金半固态浆料表观粘度研究 被引量:5

Steady Apparent Viscosity of Hypereutectic Al-Si Semi-solid Alloy Slurry
下载PDF
导出
摘要 通过自制的双筒旋转粘度计对过共晶ZL117合金的表观粘度进行了研究。结果表明,随着保温温度的降低,即固相率的升高,ZL117合金浆料的表观粘度随之增加;随着搅拌电流的增加,其表观粘度先降低,在搅拌电流为14A左右时达到最低,然后增大;随着冷却速度的增大,其表观粘度增大。 We have developed a contour rotary viscometer to investigate steady apparent viscosity of hypereutectic ZL117 alloy. The results indicate that with the decrease of holding temperature, that is the increase of solid fraction, the steady apparent viscosity of the alloy slurry is increased. With the increase of stirring rate, the steady apparent viscosity is firstly decreased to the minimum value at about 14A, then increased. In addition, the steady apparent viscosity of the alloy slurry can be improved with raising the cooling rate.
出处 《特种铸造及有色合金》 CAS CSCD 北大核心 2007年第2期113-114,共2页 Special Casting & Nonferrous Alloys
基金 云南省科技型中小企业创新专项资助项目(2004CX15)
关键词 过共晶铝硅合金 半固态 流变性能 表观粘度 Hypereutectic Al-Si Alloy, Semi-solid Slurry, Rheological Property, Steady Apparent Viscosity
  • 相关文献

参考文献9

二级参考文献49

  • 1蔡卫华,杨湘杰,郭洪民,危仁杰,张莹,黎和昌.斜管法流变制浆工艺初探[J].特种铸造及有色合金,2003,23(z1):308-310. 被引量:15
  • 2张先念,张恒华,邵光杰,许珞萍,红梅.半固态A356铝合金流变特性研究[J].铸造,2005,54(1):44-48. 被引量:14
  • 3Yueko J A. Idra Prince Rheocasting and Squeeze Casling Techndogy. Die Engineer, 2002(4) :20 - 23.
  • 4Flemings M C. Behaviour of Metal Alloys in the Semi-Solid State. Metall Trans A, 1991,22A(5) :957 - 981.
  • 5Mehrabian R, Flemings M C. Die Casting of Partially Solidified Alloys. AFS Transactions, 1972,80:173 - 182.
  • 6Riek R G, Vraehnos A, Young K Pet al. Madaine Casting of a Partially Solidified High Copper Content Alloy. APS Transactions, 1975,83:25 - 30.
  • 7Shibata R, Kaneuchi T, Soda T et al. New Semi-liquid Metal Vasting Process. In: Kirkwood D H and Kapranos P. Proc of the 4th Int Conf on SemiSolid Processing of Alloys and Campositions, the Universiy of Sheffield , England, June 19-21,1996.UK:the Department of Eagineering Materials, University of Sheffield, 1996:296 - 300.
  • 8Wang N, Peng Hs, Wang K K. Asseement of Porosity Level in Rheomoldod Parts. In: Kirkwood D H and Kapranos P. Proc of the 4th Int Canf an SemiSolid Processing of Alloys and Compositions, the Univetsiy of Sheffield, England, June 19-21,1996. UK: the Department of Engineering Materials, University of Sheffield. 1996:342 - 346.
  • 9Wang K K, Peng H, Wang N et al . Method and Apparatus for Injection Molding if Semi-Solid Metals. US Patent 5501266,1996.
  • 10Ji S,Fan Z,Bevis M J. Semi-Solid Processing of Eagineering Alloys by a TwinScrew Rhemnolding Process. Mater Sci & Eng, 2001, 299A: 210-217.

共引文献91

同被引文献139

引证文献5

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部