开放式数控系统程序编辑模块的开发

Development of NC Program Edit Module of Open CNC System

数控加工程序编辑模块是开放式数控系统中具有共性和通用性的部分,把它作为独立的部分进行开发有利于软件的重用。本文对数控加工程序编辑模块进行了开发分析,采用了可独立运行的数控加工程序编辑模块的开发和利用编辑控件的数控加工程序编辑模块的开发;并根据数控加工程序编辑模块的特点,研究了使用C++Builder来开发查错功能组件的实现方法。对数控加工程序编辑模块开发的研究,可减轻对数控系统开发的工作量,为构建开放式数控系统提供通用模块。

NC program edit module is a common and universal part of open CNC, and developing it as individual module is advantageous to software muse. The development of NC program edit module was analyzed and two main methods of developing, NC program edit module which can be used individually and NC program edit module using edit component were discussed. According to the character of edit module, the realization of technology which use C^＋＋ Builder to develop error check component was researched. All research is helpful to reduce CNC system developing work and provides universal part to build open CNC system.