期刊文献+

电磁场相位对小方坯连铸结晶器电磁搅拌的影响 被引量:10

Effect of electromagnetic field phase on M-EMS of billet casting
原文传递
导出
摘要 通过数值模拟对两相和三相结晶器电磁搅拌器作用下钢液内部的磁场和流场进行耦合数值分析,得出了不同相位电磁搅拌时,钢液内部磁感应强度、电磁体积力及搅拌速度的分布规律。模拟结果表明:在相位差为90°的两相电磁搅拌器结晶器电磁搅拌时,钢液内部的磁感应强度、电磁体积力及钢液的搅拌速度要比相位差为120°三相电磁搅拌器的高。计算结果与文献中实验结果及宣钢等厂的生产实践结果一致。 Based on ANSYS software, a coupled analysis on magnetic field and fluid field of two and three phase M - EMS in a billet caster was carried out. The distribution of magnetic flux density, magnetic volume force and liquid steel stirring velocity with same current and frequency values were obtained and compared. Calculated results showed that two phase M - EMS with phase difference of 90 degree has higher stirring magnetic flux density, magnetic volume force and liquid steel stirring velocity than the three phase M - EMS with phase difference of 120 degree. Calculated results agree well with the experimental data in operation practice at Xuanhua Iron & Steel Co. and the data from literature.
出处 《连铸》 2007年第1期43-46,共4页 Continuous Casting
关键词 电磁场相位 结晶器电磁搅拌 小方坯连铸 electromagnetic field phase, M - EMS, billet casting
  • 相关文献

参考文献11

  • 1Kyung Shik OH, Yong Won CHANG. Macrosegregation Behavior in Continuously Cast High Carbon Steel Blooms and Billets at the Final Stage of Solidification in Combination Stirring [J]. ISIJ International,1995,35 (7):866 - 875.
  • 2L. BETTELMAN. Effect of mold EMS design on billet casting productivity and product quality [J]. Canadian Metallurgical Quarterly,2000,38(5)301 -309.
  • 3Keisuke Fujisaki,Takatsugu Ueyama. Magnetohydrodynamic Calculation for Electromagnetic stirring of Molten Metal [J]. IEEE Transactions on Magnetics, 1998,34 (4):2120-2122.
  • 4李春龙,姜茂发,王宝峰.组合电磁搅拌对连铸大方坯内部质量的影响[J].东北大学学报(自然科学版),2003,24(7):677-680. 被引量:18
  • 5王晓东,李廷举,金俊泽.时谐电磁场相位均衡性研究[J].大连理工大学学报,2002,42(1):75-78. 被引量:14
  • 6T. T. NATARAJAN, N. Ei - KADDAH. Finite element analysis of electromagnetically driven flow in sub - mold stirring of steel billets and slabs[J]. ISIJ International, 1998,38 (7):680-689.
  • 7Marcel Garnier. Electromagnetic Processing of Liquid Materials in Europe [J].ISIJ International, 1990,30 (1): 1-7.
  • 8T. Ishii, S. S. Sazhin, M. Makhlouf. Numerical prediction of magnetohydrodynamic flow in continuous casting process [J]. Ironmaking and Steelmaking , 1996,23 (3):267-272.
  • 9Kensuke OKAZAWA, Takehiko TOM. Fluid Flow in a Continuous Casting Mold Driven by Linear Induction Motors[J]. ISIJ International. 2001,41 (8):851 -858.
  • 10Leonardo B. Trindade, Antonio C. F. Vilela. Numerical Model of Electromagnetic Stirring for Continuous Casting Billets [J]. IEEE Transactions on Magnetics,2002,38 (6): 3658 - 3660.

二级参考文献13

  • 1[1]SPITZER K H, REITER G, SCHWERDTFEGER K. Volume force design in liquids by multifrequency electromagnetic stirring[A]. International Symposium on Electromagnetic Processing of Materials[C]. Nagoya:ISIJ, 1994. 178-182.
  • 2[2]GARNIER M. Metallurgical applications of MHD[J]. Iron and Steel, 1985, 16:12-23.
  • 3[3]SPITZER K H, DUBKE M, SCHWERDTFEGER K. Rotational electromagnetic stirring in continuous casting of round strands[J]. Metall Trans:B, 1986, 3(17B):119-131.
  • 4Oh K S, Chang Y W. Macrosegregation behavior in continuously cast high carbon steel blooms and billets at the final stage of solidification in combination stirring[J]. ISIJ International, 1995,7(35) : 866 - 875.
  • 5Limoges J, Beitelman L. Continuous casting of high carbon and alloy steel billets with in-mold dual-coil electromagnetic stirring system[J]. Iron and Steelmaker , 1997,11(24):49- 57.
  • 6Oh K S, Shin Y K, Chang Y W. The role of combination stirring and final stirring pool thickness on center defects of cominuous casting high carbon steel blooms[J]. Trans ISS,1994,4(18) :43 - 45.
  • 7Oh K S, Shin Y K, Lee I R, et al. Startup of a fix-strand billet caster at Pohang works [ J ]. Iron and Steelmaker,1991,1(18) :29 - 34.
  • 8Lipton J, Dacker C A, Kollberg S. Experience with electromagnetic stirring at SSAB oxelosund slab caster [J ].Iron and Steel Engineer. 1980,10(57) :66 - 75.
  • 9Tzavaras A A. A study of segregation phenomena in steel solidification structures grown under fluid flow[J ]. Journal of Crystals, 1974,6(25) :470 - 471.
  • 10Nakatani M, Adachi T, Ikehara Y, et al. Quality improvement by the application of stirrer to continuous casting bloom[J ]. Trans ISIJ, 1978, (18) :352 - 360.

共引文献26

同被引文献96

引证文献10

二级引证文献61

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部