IDE接口的一种新型实现方法

New realization method of IDE interface

利用逻辑芯片配合处理器——产生IDE接口通信所需要的信号,用硬件编程语言VHDL(Very High Speed Integrated Circuit Hardware Description Language)实现IDE接口所要求的时序。通过对本设计进行仿真,结果证明此IDE接口遵循ATA规范,可以挂接普通硬盘。利用本文的设计,任何支持16位数据通信的处理器都可以实现IDE接口通信。如果利用现有的硬件设备,则本设计无需增加额外成本,其稳定性也得到了实际验证。

In this paper,a logic IC is used to present the signals that are necessary for IDE communication,the program in VHDL （Very High Speed Integrated Circuit Hardware Description Language） is for the timing of IDE communication.A simulation result is also presented,and this result proves that the design in this paper complies with the ATA standard.By using the method in this paper,any processor that supports 16 bit bus can support IDE communication.This is a very new method.It gives a hint to system design with IDE interface.This design based on ATA standard can accommodate normal hard disk.By adopting the existing hardware,the system does not need additional cost,and its stability has been proved in practice.