期刊文献+

径向法测量经编双轴向织物渗透率 被引量:1

Radial Fow Permeability Measurement of Biaxial Warp Knitting Glass Fabric
下载PDF
导出
摘要 用径向法测量了经编双轴向玻璃纤维织物的渗透率,研究了织物结构、纤维体积分数和注入压力对渗透率的影响。实验表明,经编双轴向玻璃纤维织物的渗透率呈各向异性,随着纤维体积分数增大,织物渗透率减小,各向异性的程度增加。在低的纤维体积分数下,低的注入压力影响渗透率的精确测量,注入压力增大到一定值时,纤维渗透率保持恒定。 Radial flow technique is employed to determine the permeability of the biaxial warp knitting glass fabric. The affects of weave structure, fibrous volume content and injection pressure on the in-plane permeability are studied. The results indicate that the permeability of the biaxial warp knitting glass fabric is anisotropic. The extent of anisotropy increases and the permeability decreases as the value of the fibrous volume content enhances. The accurate permeability is influenced by low injection pressure at low fibrous volume content. The permeability can be kept constant when the injection pressure reaches a higher value.
出处 《宇航材料工艺》 CAS CSCD 北大核心 2007年第1期55-57,共3页 Aerospace Materials & Technology
基金 天津市教委发展基金(020414) 天津市科委自然基金(013604311)资助
关键词 树脂传递模塑 各向异性 渗透率 经编双轴向织物 Resin transfer moulding, Anisotropy, Permeability, Biaxial warp knitting fabric
  • 相关文献

参考文献17

  • 1Foley M F. Techno-economic automated composite manufacturing techniques. J. SAMPE Quart, 1991 ; ( 1 ) :61 -68
  • 2Ahn K J,Seferis J C. Simultaneous measurements of permeability and capillary pressure of thermosetting matrices in woven fabric reinforcements. J. Polym. Compos. , 1991 ; 12:146 - 152
  • 3Trevino L. Analysis if resin injection molding in molds with replaced fibre mats I:permeability and compressibility measurements. J. Polym. Compos. , 1991 ; 12:20
  • 4Verheus A S, Peeters J H A. The role of reinforcement permeability in resin transfer moulding. J. Compos. Manual, 1999 ;4:33 - 38
  • 5Williams J G. Liquid flow through fibre beds. J. Polym.Eng. Sci. , 1974; 14:413 -419
  • 6Adams K L, Russel W B, Rebenfeld L. Radial penetration of a viscous liquid into a planar anisotropic porous medium. J.Compos Manual, 1988 ; 14:203 - 215
  • 7Adams K L, Miller B, Rebenfeld L. Forced in-plane flow of an epoxy resin in fibrous networks. J. Poly. Eng. Sci. , 1986 ;26 :1 434- 1 441
  • 8Cater E J, Fell A W,Summerscales J. A simplified model to calculate the permeability tensor of an anisotropic fibre bed. J.Compos. Manu. , 1995 ;6:228 -235
  • 9Chan A W, Hwang S T. Anisotropic in-plane permeability of fabric media. J. Polym. Eng. Sci. , 1991 ;31 : 1 233- 1 239
  • 10Hirt D E,Adams K L. In-plane radial fluid flow characterization of fibrous materials. J. Thermal Insulation, 1987 ; 10 : 153- 172

共引文献3

同被引文献8

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部