期刊文献+

Corner effects in double-gate/gate-all-around MOSFETs

Corner effects in double-gate/gate-all-around MOSFETs
下载PDF
导出
摘要 Two kinds of corner effects existing in double-gate (DG) and gate-all-around (GAA) MOSFETs have been investigated by three-dimensional (3D) and two-dimensional (2D) simulations. It is found that the corner effect caused by conterminous gates, which is usually deemed to deteriorate the transistor performance, does not always play a negative role in GAA transistors. It can suppress the leakage current of transistors with low channel doping, though it will enhance the leakage current at high channel doping. The study of another kind of corner effect, which exists in the corner at the bottom of the silicon pillar of DG/GAA vertical MOSFETs, indicates that the D-top structure with drain on the top of the device pillar of vertical transistor shows great advantage due to lower leakage current and better DIBL (drain induced barrier lowering) effect immunity than the S-top structure with source on the top of the device pillar. Therefore the D-top structure is more suitable when the requirement in leakage current and short channel character is critical. Two kinds of corner effects existing in double-gate (DG) and gate-all-around (GAA) MOSFETs have been investigated by three-dimensional (3D) and two-dimensional (2D) simulations. It is found that the corner effect caused by conterminous gates, which is usually deemed to deteriorate the transistor performance, does not always play a negative role in GAA transistors. It can suppress the leakage current of transistors with low channel doping, though it will enhance the leakage current at high channel doping. The study of another kind of corner effect, which exists in the corner at the bottom of the silicon pillar of DG/GAA vertical MOSFETs, indicates that the D-top structure with drain on the top of the device pillar of vertical transistor shows great advantage due to lower leakage current and better DIBL (drain induced barrier lowering) effect immunity than the S-top structure with source on the top of the device pillar. Therefore the D-top structure is more suitable when the requirement in leakage current and short channel character is critical.
出处 《Chinese Physics B》 SCIE EI CAS CSCD 2007年第3期812-816,共5页 中国物理B(英文版)
基金 Project supported by State Key Fundamental Research Project of China (Grant No 2000036501) and the National Natural Science Foundation of China (Grant No 90207004).
关键词 GAA DG DIBL S-top D-top corner effect GAA, DG, DIBL, S-top, D-top, corner effect
  • 相关文献

参考文献11

  • 1Li Y and Chou H M 2005 Nanotechnology 4 645
  • 2Li Y M, Chou H M and Lee J W 2005 Nanotechnology 4510
  • 3Kathawala G A, Winstead B and Ravaioli U 2003 Electron Devices 50 2467
  • 4Van Ackern G and Park S 2005 IEEE Workshop on Microelectronics and Electron Devices (Boise, ID) p79
  • 5Zhang X J, Gong X, Wang J P and Hao Y 2006 Chin.Phys. 15 613
  • 6Tong J N, Zou X C and Shen X B 2004 Acta Phys. Sin.53 2905 (in Chinese)
  • 7Xiong W, Park J W and Colinge J P 2003 SOI Conference(Newport Beach, CA) p111
  • 8Doyle B, Boyanov B, Datta S, Doczy M, Hareland S, JinB, Kavalieros J, Linton T, Rios R and Chau R 2003 VLSI Technology 133
  • 9Ancona M G and Tiersten H F 1987 Phys. Rev. B 35 7959
  • 10Bricout P H and Dubois E 1996 Electron Devices 43 1251

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部