期刊文献+

Al_2O_3/TiB_2/SiC_w三元复合陶瓷材料的高温摩擦磨损特性研究 被引量:2

Study on The Wear-friction Behavior of Al2O3/TiB2/SiCw Ceramic Composite at Elevated Temperature
下载PDF
导出
摘要 研究Al2O3/TiB2/SiCw三元复合陶瓷材料与硬质合金往复滑动摩擦时,在不同气氛和温度条件下的摩擦磨损特性。结果表明,随温度和气氛不同,材料的摩擦系数有着不同的变化规律。在高温空气气氛中摩擦时,SiC晶须氧化生成的表面氧化膜可起到固体润滑剂的作用,能降低摩擦系数。由于SiC晶须的氧化使得材料表面晶须的增韧补强作用削弱,因而加速了材料的磨损。通入氮气有利于减轻SiC晶须的氧化,但由于硬质合金中的Co扩散到陶瓷材料中,使材料产生粘着磨损和扩散磨损。 Friction-wear behavior both in air orin N,atmosphere at different temperature rangingfrom 200℃ to 800℃ has been studied for Al2O3/TiB2/SiCw ceramic composite against cemented carbide(YG8).The friction coefficient and wear ratewere examined.Results showed that substantialimprovement in wear resistance can be obtainedwhen sliding in N2 atmospher at high temperature.The mechanism responsible to the improvementwas determined to be the prevention of oxidation ofSiC whiskers.A drop in wear resistance of thiscomposite when sliding in air atmosphere at hightemperature were accompanied by oxdation of SiCwhisker.
作者 邓建新 艾兴
机构地区 山东工业大学
出处 《中国机械工程》 EI CAS CSCD 北大核心 1996年第4期105-107,共3页 China Mechanical Engineering
基金 山东省教委资助
关键词 碳化硅晶须 硼化钛 陶瓷材料 磨损 三元复合材料 SiC whisker TiB2 ceramicmaterial friction and wear high temperature
  • 相关文献

参考文献4

二级参考文献3

共引文献12

同被引文献17

  • 1艾兴,邓建新,李兆前.SiC晶须对Al_2O_3/TiB_2/SiC_w陶瓷刀具材料高温断裂韧性的影响[J].硅酸盐学报,1996,24(1):85-89. 被引量:2
  • 2邓建新,艾兴.Al2O3/TiB2/SiCw三元复合材料的力学性能及显微结构[J].复合材料学报,1996,13(3):27-32. 被引量:3
  • 3王朝胜,邹正光,顾涛,龙飞.天然高岭土原位还原制备SiC_w/Al_2O_3复相陶瓷粉末[J].材料工程,2006,34(12):11-15. 被引量:8
  • 4GALUSEK D,SEDLACEK J,SVANCAREK P,et al.The influence of post-sintering HIP on the microstructure,hardness,and indentation fracture toughness of polymer-derived Al2O3-SiC nanocomposites[J].Journal of the European Ceramic Society,2007,27(2/3):1237-1245.
  • 5BELMONTE M,NIETO M I,OSENDI M I,et al.Influence of the SiC grain size on the wear behavionr of Al2O3/SiC composites[J].Journal of the European Ceramic Society,2006,26(7):1273-1279.
  • 6GALUSEK D,SEDLACEK J,RIEDEL R.Al2O3-SiC composites prepared by warm pressing and sintering of an organosilicon polymer-coated alumina powder[J].Journal of the European Ceramic Society,2007,27(6):2385-2392.
  • 7MERINO J O L,TODD R I.Relationship between wear rate,surface pullout and microstructure during abrasive wear of alumina and alumina/SiC nanocomposites[J].Acta Materialia,2005,53(12):3345-3357.
  • 8YOUNG M K,KWONA W T,YOUNG W K.Development of Al2O3-SiC composite tool for machining application[J].Ceramics International,2004,30(8):2081-2086.
  • 9AMROUNE A,FANTOZZI G,DUBOIS J,et al.Formation of Al2O3-SiC powder from andalusite and carbon[J].Materials Science and Engineering A,2000,290(1/2):11-15.
  • 10HINCKLEY D N.Variability in "crystallinity" values among the kaolin deposits of the coastal plain of Georgia and South Carolina[J].Clays Clay Miner,1963,11:229-235.

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部