摘要
用Ｍｏ部分替代Ｆｅ－Ｃｕ－Ｎｂ－Ｓｉ－Ｂ合金中的Ｎｂ而制备的Ｆｅ（７３）Ｃｕ１Ｎｂ（１．５）Ｍｏ２Ｓｉ（１２．５）Ｂ（１０）非晶合金，在５００—６２０℃的温度范围内进行了等温退火处理．对退火后样品进行了磁性、微结构及物相研究，表明在５３０℃左右退火后具有最佳软磁性能．当退火温度大于６００℃时，有Ｍｏ２ＦｅＢ２及其它化合物析出从而使合金软磁性恶化．Ｍｏ与Ｎｂ一样有抑制晶粒生长，细化晶粒之作用．
The Fe73Cu1Nb1.5Mo2Si12.5 B10 amorphous alloys were prepared by a meltquenching technique. The annealing temperature ranges from 500℃ to 620℃.The magnetic preperties, microstructure and the formed phases on annealed nanocrystalline samples were investigated. It is shown that the annealing temperature of the optimum soft magnetic properties is around 530℃. At the annealing temperature above 600℃, the soft magnetic properties worsen quickly. This could be attributed to the fact that the Crystallization process becomes more complex and a fraction of Mo2FeB2 precipitated.
出处
《上海大学学报（自然科学版）》
CAS
CSCD
1996年第3期294-297,共4页
Journal of Shanghai University:Natural Science Edition
关键词
纳米微晶合金
软磁性能
钼
磁性
软磁合金
nanocrystalline alloys
soft magnetic properties
annealing temperature
