期刊文献+

1Cr18Ni9Ti在高温水蒸气中的氧化特征 被引量:3

Oxidation Characteristics of 1Cr18NigTi Steel in High-temperature Fired-gas Containing Water Vapor
下载PDF
导出
摘要 针对在含有大量水蒸气的燃气中1Cr18Ni9Ti不锈钢发生严重氧化的现象,分析了在高温水蒸气环境中1Cr18Ni9Ti不锈钢的氧化特征和机理。通过X射线衍射分析验证了高温水蒸气氧化膜是由外层和内层构成的物理模型,建立了数学分析模型并通过计算得到了一定工况下氧化动力学曲线和扩散元素的扩散摩尔分数分布曲线。 1Cr18Ni9Ti is severely oxidized in high temperature fired- gas containing water vapor. This paper analyzes the 1Cr18Ni9Ti' s oxidation mechanism and characteristics in high temperature fired - gas containing water vapor. The physical model containing the outer layer and the internal layer is tested and analyzed by X - ray diffraction tests. The mathematical model is built to calculate the curves of the oxidation kinetics and the elements' distribution under certain conditions.
出处 《石油化工腐蚀与防护》 CAS 2007年第2期14-17,共4页 Corrosion & Protection In Petrochemical Industry
基金 国家自然科学基金(50276067)。
关键词 1Cr18Ni9Ti不锈钢 水蒸气 氧化机理 高温 1Cr18Ni9Ti stainless steel, water vapor, oxidation mechanisms, high temperature
  • 相关文献

参考文献5

  • 1小若正伦著 袁宝林 过家驹 朱应杨 译.金属的腐蚀破坏与防蚀技术[M].北京:化学工业出版社,1988.313-317.
  • 2Fujii C T, Meussner R A.The Mechanism of the High - Temperature Oxidation of Iron Chromium Alloys in Water Vapor[ J] .Journal of the Electrochemical Society, 1964,111 ( 11 ) : 1215 ~ 1221
  • 3Ninomiya S. Corrosion of power plants and its prevention[J] .The Thermal and Nuclear Power,1996,47(5) :69 - 87
  • 4Rakowski. J.M. The Oxidation of Metal Alloy Foils in the Presence of Water Vapor. 2004ASME. Allegheny Ludlum Technical Center, Alabama and Pacific Avenues, Brackenridge, PA 15014 ~ 15097
  • 5张勇健,刘伟强.耐热不锈钢在高温高压水蒸气中的氧化探讨[C].见:湖南省宇航学会.湖南省宇航学会学术论文集(航天分册),长沙:国防科技大学出版社.2006.136~140

共引文献2

同被引文献13

  • 1黄亚敏,吴佑明,潘春旭.奥氏体不锈钢超高温氧化失效机理研究[J].郑州大学学报(工学版),2009,30(1):53-56. 被引量:10
  • 2周邦新,李强,姚美意,刘文庆,褚玉良.锆-4合金在高压釜中腐蚀时氧化膜显微组织的演化[J].核动力工程,2005,26(4):364-371. 被引量:46
  • 3周邦新,李强,刘文庆,姚美意,褚于良.水化学及合金成分对锆合金腐蚀时氧化膜显微组织演化的影响[J].稀有金属材料与工程,2006,35(7):1009-1016. 被引量:43
  • 4El-Genk MS,Paramonov D.An analysis of disassemblingradial reflector of a thermionic space nuclear reactor powersystem. J Nucl Saf . 1994
  • 5Yamanaka S,Yoshioka K,Uno M,et al.Thermal and me-chanical properties of zirconium hydride. J Alloys Co-mpd . 1999
  • 6Chen H M,Ma C L.Oxidation of pure zirconiumin pureoxygenin temperature range 400-850℃. Key Eng Ma-ter . 1988
  • 7Valler H W.Performance of a transpiration-regenerativecooled rocket thrust chamber. NASACR159742,N.80-14189 .
  • 8James M Rakowski.The Oxidation of Metal Alloy Foils in the Presense of Water Vapor. Journal of Engineering for Gas Turbines and Power,ASME . 2004
  • 9Bruce A. Pint,Robert W. Swindeman,Karren L. More,and Peter F. Tortorelli.Materials Selection for High Temperature (750 - 1000°C)Metallic Recuperators for Improved Efficiency Microturbines. . 2001
  • 10H.Okada,M.Igarashi,S.Yamamoto,O.Miyahara,A.Iseda,N.Komai,F.Masuyama.Long-term service experience with advanced austenitic alloys in Eddystone power station. 2007 Proceedings of the ASME Pressure Vessels and Piping Conference-8th International Conference on Creep and Fatigue at Elevated Temperatures-CREEP8 . 2008

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部