摘要
Coiling technique is used to suppress high-order modes of a large mode area （LMA） double clapt multimode fiber. Output powers and beam quality factors M^2 are measured under two different coiling radii. 217 W with M^2 of 2.96 can be obtained for coiling radius of 165 mm and 160 W with M^2 of 1.38 for 52 mm. The corresponding slope efficiencies are 60% and 48%. With smaller coiling radius, the brightness is 3.4 times as high as that of the larger one.
Coiling technique is used to suppress high-order modes of a large mode area （LMA） double clapt multimode fiber. Output powers and beam quality factors M^2 are measured under two different coiling radii. 217 W with M^2 of 2.96 can be obtained for coiling radius of 165 mm and 160 W with M^2 of 1.38 for 52 mm. The corresponding slope efficiencies are 60% and 48%. With smaller coiling radius, the brightness is 3.4 times as high as that of the larger one.
基金
This work was supported by the National Key Basic Research Project,Shanghai Science & Technology Foundation (No.04D205120,05D22001)
Knowledge Innovation Project of the Chinese Academy of Sciences
