期刊文献+

Effect of Sintering Conditions on Structure of Manganese Zinc Ferrite Powders

Effect of Sintering Conditions on Structure of Manganese Zinc Ferrite Powders
下载PDF
导出
摘要 The structures of the Mn-Zn ferrites synthesized under different sintering conditions by the sol-gel method were investigated by the X-ray diffraction (XRD) and the scanning electron microscopy (SEM) with focus on two factors: the pre-sintering treatment and the calcining time. The results show that the sintering conditions have significant effects on the structures and the particle size of the Mn-Zn ferrites. Compared with the products without pre-sintering, those pre-sintered at 500℃ have a single phase and no diffraction peaks of Fe2O3 that could be found. The effects of the pre-sintering temperature on the structures of the ferrites were also studied. As a result, 500℃ proves to be the favorite in the pre-sintering treatment. The XRD patterns of the ferrites calcined at 1 200℃ for 6 h will present diffraction peaks of pure crystallization of spinel phase while those for 2 h or 4 h will show peaks of Fe2O3. The SEM also bears witness to well-grown grains of pure Mn-Zn ferrites if calcined for 6 hours. The structures of the Mn-Zn ferrites synthesized under different sintering conditions by the sol-gel method were investigated by the X-ray diffraction (XRD) and the scanning electron microscopy (SEM) with focus on two factors: the pre-sintering treatment and the calcining time. The results show that the sintering conditions have significant effects on the structures and the particle size of the Mn-Zn ferrites. Compared with the products without pre-sintering, those pre-sintered at 500℃ have a single phase and no diffraction peaks of Fe2O3 that could be found. The effects of the pre-sintering temperature on the structures of the ferrites were also studied. As a result, 500℃ proves to be the favorite in the pre-sintering treatment. The XRD patterns of the ferrites calcined at 1 200℃ for 6 h will present diffraction peaks of pure crystallization of spinel phase while those for 2 h or 4 h will show peaks of Fe2O3. The SEM also bears witness to well-grown grains of pure Mn-Zn ferrites if calcined for 6 hours.
出处 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2006年第B12期179-182,共4页 中国航空学报(英文版)
基金 Harbin Youth Foundation (2005AFQXJ031)
关键词 manganese zinc ferrite SPINEL SOL-GEL sintering time manganese zinc ferrite spinel sol-gel sintering time
  • 相关文献

参考文献1

二级参考文献12

  • 1Chen Yajie,Liu Peisheng,Jin Zongming.Studies of La2O3 additive in Ni-Zn ferrite[J].Journal of Materials Science Letters.1995(14)
  • 2CHENYa jie,LIUPei sheng,JINZong ming.Studies of La2O3 additive in NiZnferrite[].Journal of Mate rials Science Letters.1995
  • 3Zenger M.Modern ferrite technologies and products[].Journal of Materials and Product Technology.1994
  • 4Topfer J,Schops W,Nauber P,et al.Modern developmental trend in the production and application of hard and soft magnetic ferrite materials[].Ceramic Forum International.1999
  • 5Liu C S,Wu J M,Tsay M J,et al.Optimum power-loss and microstructure of MnZn ferrites under consideration of particle size[].IEEE Transactions on Magnetics.1996
  • 6Jeong Geun-Min,Choi Jaeho,Kim Sung-Soo.Abnormal grain growth and magnetic loss in Mn-Zn ferrites containing CaO and SiO2[].IEEE Transactions on Magnetics.2000
  • 7Gasiorek S,Kulikowski J.Some physical and technological effects of V2 O5 or Bi2 O3 on the properties of Ni-Zn ferrites[].Journal of Magnetism and Magnetic Materials.1982
  • 8Sale F R,Fan J,Chien Y T.The effects of V2 O5 on the microstructure and magnetic properties of gel-derived MgMn-Zn and Mn-Zn ferrites[].Am Ceram Trans.1995
  • 9Kwang P C,Won K K,Sung H L,et al.Crystalloraphic and magnetic properties of Ti x Co1+ x Fe2-2 x O4 ferrite powder[].Journal of Magnetism and Magnetic Materials.2001
  • 10Rezlescu E,Rezlescu N,Pasnicu C,et al.Nickel-zinc ferrites with Ti-Ge substitution for high-frequency use[].Ceramics International.1993

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部